Loading ...
Loading ...
Loading ...
DRYER USE
--UAL E_Umated_me I High 1
rimed D_/ Remaining O Medium
-© I-°" @
Loud0
0 _a'a Low
Stff_0
• RaNd D_ Less Air Only Off
0
o o o o
DRYNESS "I_MP _
_'_ME LEVEL _ END
SlGNL_.
Hald f:_ 3
seconds
]o_ / un/odc Pause
_n_l
€ONTROL ON 0
Sensing 0
_t O
Damp O
Cool Down O
Cycle Complete O
Ex_a Cam O
Corr_ol Lodged O
AUmDMA11_
Kuvy Dut_
Nmmal •
Delicate
Starting Your Dryer
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on It (even after washing).
Failure to follow these Inatructlons can result In death,
explosion, or fire.
Fire Hazard
No washer can completely remove o11.
Do not dry anything that has ever had any type of oll on
It (Including cooking oils).
Items cordalnlng foam, rubber, or plaatlc must be dried
on a clothesline or by using an Air Cycle.
Failure to follow these Inatructlons can result In death
or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
The following isa guide to starting your dryer. Please refer to
specific sections of this manual for more detailed information.
1. Clean lint screen before or after each cycle. See "Cleaning
the Lint Screen."
2,
3,
Place laundry into dryer and shut doon See "Loading."
Rotate the dial to select either an Automatic or Manual Cycle
then press the CONTROL ON button. The preset settings and
drying time for the cycle chosen will be displayed.
To use an Automatic Cycle
m Point the dial to an Automatic Cycle.
a
Select DRYNESS LEVEL to adjust how dry you want the
load to be. The time displayed is an estimated length of
the cycle based on the Dryness Level selected. As the
cycle runs,the control senses the dryness of the load and
adjusts the time automatically for the selected Dryness
Level.
I om
Less
0
DRYNESS
LEVEL
NOTE: Time isnot adjustable for Automatic Cycles. Pressing
the Manual Dry Time (- or +) buttons will cause a triple beap,
indicating that the time cannot be changed.
m Press the EXTRA CARE feature button ifthis option is
desired.
a
a
Press the CYCLE END SIGNAL button to set signal
volume to desired level.
Press (and hold) HOLD TO START button until dryer starts
(about 1 second).
Once an Automatic cycle has started, the Extra Care feature
and the Cycle End Signal level can be adjusted. Pressthe
OFF button twice to stop the dryer and clear the settings,
allowing you to select another cycle and Dryness Level.
18
Loading ...
Loading ...
Loading ...