Loading ...
Loading ...
Loading ...
www.bissell.com
11
Operations
Portable spot cleaning mode
Preparing the machine
1. Step on the portable spot cleaning pedal
to release the portable spot cleaner.
2. Release flex hose by twisting the hose
secure latch clockwise. Unwrap flex
hose completely.
3. Attach the desired tool to the hose grip
until it snaps together. Make certain the
tool is securely attached.
4. Twist the Quick Release cord wrap clock-
wise to unwrap the power cord com-
pletely and plug into grounded outlet.
Filling tank
1. Follow the instructions for filling the tank
in the upright cleaning mode section on
page 8
Cleaning with Tools:
IMPORTANT! If using to clean
upholstery, check upholstery tags.
Check manufacturer’s tag before
cleaning. “W” or “WS” on the tag
means you can use your Lift-Off
deep cleaner. If the tag is coded
with an “X” or an “S”(with
a diagonal stripe through it), or
says “Dry Clean Only”, do not
proceed with any deep cleaning
machine. Do not use on velvet or
silk. If manufacturer’s tag is
missing or not coded, check with
your furniture dealer.”)
1. Hold the tool approximately 2.5 cm
above the soiled surface. Press the
spray trigger to apply the cleaning
solution to the soiled area.
Note: Hold end of hose below the
tank water level to help prime the
portable spot cleaner.
2. Using the brush on the tool, gently scrub
the area to be cleaned.
3. Apply downward pressure on the tool
and pull it toward you. The suction
will remove the dirt and cleaning
solution. Continue until no more dirt
can be removed.
Adsdfdd ghg bvh
cvbbj jkn hnbj jkvh
gcghhjj jhffhl kllgh
Manufacturer’s tag
IMPORTANT
Check for colourfastness in
an inconspicuous place. If
possible, check upholstery
stuffing. Coloured stuffing
may bleed through fabric
Loading ...
Loading ...
Loading ...