Loading ...
Loading ...
Loading ...
17
OVERLAY DOOR PANEL INSTALLATION
SECTION A-A
SCALE 1 : 1
LOCK
NUT
BRASS EXTENSION
CAM
PHILLIPS SCREW
13/16 COUNTER
BORE 7/16 DEEP
1/2 HOLE
3/4 INCH
WOOD PANEL
SPRING WASHER
INNER
DOOR
Figure 20
Step 6: Install lock cam
Attach the lock cam to the back of the lock assem-
bly with the phillips head screw provided. Orient the
lock cam vertically when installing on the lock.
Figure 19
Cam stop
washer
Spring
washer
Cam
Set screw
Lock
Key
Retainer
nut
Screw
Brass extension
(2 lengths provided
Step 8: Secure the cabinet
Use the #8 x
3
⁄4" black screws from the literature
pack to secure the counter top to the cabinet top
through the holes in the cabinet "Z" bracket.
Step 7: Install the door
Carefully open the top and bottom hinges on the
door being careful as there are many pinch points.
Place the hinges over the 4 screws in the cabinet,
2 at the top and 2 at the bottom and slide the door
into position. Tighten the 4 hinge screws with a
phillips screwdriver. (See Figures 11 and 11a).
Place wire harness from the grille and mount to the
bottom of the door with the screw and "P" clamp
removed in step 1. (See Figure 11b). Reconnect the
wire harness, (See Figure 12).
Cabinet
"Z" bracket
#8 x 3⁄4" black
screws
(3 places)
Figure 21
Loading ...
Loading ...
Loading ...