Loading ...
Loading ...
Loading ...
Model 809H
Electric PTO Clutch
PTOIdler Bracket
(mounted on tractor)
_PTO belt (Top)
Deck Idler Pulley
Right Hand
Double Pulley
(beneath belt guard)
Left Hand
Double Pulley
Center Pulley
NOTE: Left hand belt cover not shown for clarity. 46-inch deck shown.
Figure 15
To change or replace the deck belts on your tractor, •
proceed as follows:
• Lower the deck by moving the deck lift lever into the •
bottom notch on the right fender.
• Remove the belt guards by removing the self- •
tapping screws that fasten them to the deck.
• Model 809H only: Grasp the PTO idler bracket and •
pivot it toward the discharge chute to relieve
tension on the PTO belt. •
Model 809K
Electric
PTO Clutch
\
Self-Tapping Screws
Remove the PTO belt from the electric PTO clutch
and from around the PTO idler pulley, if present.
Grasp the deck idler pulley and pivot it toward the
left side of the deck to relieve tension on the belt.
Remove the belt from around all spindle pulleys,
and deck idler pulley(s).
According to your tractor model, route the new belts
as shown in Figure 16 or Figure 17.
Remount the belt guards removed earlier.
Deck Idler Pulleys
_Deck / PTO belt
Right Hand
Pulley
Left Hand
Pulley
NOTE: Belt covers not shown for clarity. 54-inch deck shown.
Figure 16
2O
Loading ...
Loading ...
Loading ...