Loading ...
Loading ...
Loading ...
4.3.4 Moving the lower bearing parts to the
other side
Fig. 15
u
Lift the bearing pin completely upward and remove.
Fig. 15 (1)
u
Undo the screws with a T25 screwdriver and remove the
bearing bracket
Fig. 15 (2)
Fig. 16
u
Remove the cover and fix it on the other side.
Fig. 16 (1)
u
Place the bearing bracket on the other side and screw in
with the aid of a T25 screwdriver. Start with screw 2 at the
bottom in the middle.
Fig. 16 (2)
u
Screw in screws 3 and 4.
Fig. 16 (3, 4)
u
Insert the bearing pin completely. Make sure that the catch
mechanism is pointing to the rear.
Fig. 16 (5)
4.3.5 Moving the handles to the other side
Fig. 17
u
Pull off the cover.
Fig. 17 (1)
u
Remove the screws with the T15 screwdriver.
Fig. 17 (2)
u
Remove the handle.
Fig. 17 (3)
u
Carefully lift up the side plugs with a slotted screwdriver and
pull them out.
Fig. 17 (4)
u
Insert the plugs again on the other side.
Fig. 17 (5)
Putting into operation
10 * Depending on model and options
Loading ...
Loading ...
Loading ...