Loading ...
Loading ...
Loading ...
6
NOTE: External hygrometer readings and humidistat readings may differ. Humidity
levels can vary significantly even in one room. The amount of time it takes to affect the
room humidity depends on the relative humidity of the air. In especially dry areas it could
take up to 48 hours to see humidity climb to the desired level.
A digital hygrometer is available for purchase by calling 1-800-547-3888
HUMIDISTAT
This unit has an automatic humidistat located on the
power cord. It senses the percentage of humidity in the
air (ambient humidity) and causes the humidifier to cycle
on and off to maintain the selected humidity set point.
The fan will turn on if the room’s humidity falls 3% below
the set point, and will continue to run the until the
humidity level has raised 1% above the set point. The
fan will continue this cycle as needed.
NOTE: Be sure the humidistat located on the power cord
is at least two inches away from the wall, free from
obstruction and away from any hot air source.
CO
NTROLS AND OPERATION
Where you set your desired humidity levels depends on your personal comfort level,
outside temperature and inside temperature. A starting set point of 30% to 40%
humidity is recommended, but there may be conditions that require a different setting.
NOTE: If excessive condensation occurs, reduce
fan speed and/ or humidity set point.
DIGITAL DISPLAY
Press the power button once to turn the unit on.
Initially there is a slight delay while the
electronics calibrate.Two bars (- -) appear during
this time. Once calibration is complete the
display will show ambient humidity of the room.
A flashing 20 display indicates that the room
humidity is less than 20%.
NOTE: The default settings at initial startup are
(LOW) F1 fan speed and 65% set humidity. After desired settings are selected by the
user, they remain as long as the unit remains plugged in and there is no power
interruption. When the unit is unplugged, the original default settings are reinstated.
FAN SPEED
This humidifier is equipped with a 3-speed fan control. Initially
pressing the speed button will display the current speed setting.
Each push of the speed button advances the mode through the
settings of (HIGH) F3, (MEDIUM) F2, (LOW) F1 and A (AUTO).
The AUTO (A) setting allows the auto humidistat to select the fan speed necessary to
maintain the desired humidity level.
HUMIDITY CONTROL
The humidity button allows you to adjust the humidity to suit your
needs. This humidifier will automatically cycle on and off as required
to maintain the selected setting.
The readout displays both ambient and selected (set) humidity
percentage (%) settings when humidity control button is pressed. The ambient readout
has a range of 20% to 95%. If the ambient humidity level is equal to or less than 20%
the display will show a flashing 20.
Loading ...
Loading ...
Loading ...