Loading ...
Loading ...
Loading ...
* Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC
525 (480) / 60i 15.73 59.94 * *
525 (480) t60p 31.47 " 59.94 * *
750 (720)/60p 45.00 59.94 * *
1,125 (1,080) 160i ' 33.75 " 59.94 ' * ' * '
1,125 (1,080)/60p 67.43 59.94 *
1,125 (1,080) t60p ' 67.50 ' 60.00 ....
640 x 400 @70 31.47 70.08 *
640 x 480 @60 ' 31.47 ' 59.94 ' ' ' *
Macintosh13" (640 x 480) 35.00 66.67 *
640 x 480 @75 ' 37.50 ' 75.00 ' ' ' *
852 x 480 @60 31.47 59.94 *
800 x 600 @60 ' 37.88 ' 60.32 ' ' ' *
800 x 600 @75 46.88 75.00 *
800 x 600 @85 ' 53.67 ' 85.08 ' ' ' *
Macintosh16" (832 x 624) 49.73 74.55 *
1,024 x 768 @60 ' 48.36 " 60.00 ' ' ' *
1,024 x 768 @70 56.48 70.07 *
1,024 x 768 @75 ' 60.02 ' 75.03 ' ' ' *
1,024 x 768 @85 68.68 85.00 *
Macintosh 21" (1,152 x 870) 68.68 ' 75.06 ' ' ' *
1,280 x 1,024 @60 63.98 60.02 *
1,366 x 768 @60 ' 48.36 " 60.00 ' ' *
Note
@Signals other than above may not be displayed properly.
@The above signals are reformatted for optimal viewing on your display.
@Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical
scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200
lines.)
@Some PC models cannot be connected to the set.
@There is no need to use an adapter for computers with IBM PC/AT compatible D-sub 15P terminal.
@The maximum resolution: 1,280 x 1,024
If the display resolution exceeds these maximums, it may not be possible to show fine detail with sufficient clarity.
@Signal Names for D-sub 15P Connector
Pin Layout for PC Input
Terminal
Pin No. Signal Name Signal Name Signal Name
_i_ R (6_ GND (Ground) _ NO (not connected)
@ G _,_ GND (Ground) @ NC
_3_ B _o_ GND (Ground) _3_ HDtSYNC
(4_ NC (not connected) _ NC (not connected) _ VD
(,57 GND (Ground) GND (Ground) NC
C_
CT
O
6"
93
m,
O
53
Loading ...
Loading ...
Loading ...