Loading ...
Loading ...
Loading ...
Operating Peripheral Equipment
You can operate other manufacturers' equipment using this TV's remote control.
Connect the external equipment to the TV and
Power Off the external equipment
POWER
+
VCR DBS/CBL
DVD
U_Q
UmH
_BB
m
POWER
• Press to return to the TV
mode
"IV
Press both buttons simultaneously for
more than 3 seconds.
@Release the buttons when the equipment selection
buttons start flashing.
Select the equipment
with the equipment selection button
@The selected button remains lit (other buttons are not lit).
Input the equipment's 4-digit remote
control code (p.45-47)
Operate the equipment with the remote
control (p. 44)
@The external equipment turns On.
• If the equipment does not operate with the
remote control
@When your equipment has a single code
®, Input the remote control code again
@When your equipment has multiple codes
Change the code with _) above and test again
O
i,
"13
(D
::3"
®5
__1-_
@Registration will fail if the wrong code is input or it takes more than 30 seconds to register.
This procedure searches all codes and is called the "sequence method."
_i_After step _, above, change the code and
test
POWER
Operate the equipment with the remote
control (p. 44)
@ Repeat until the code is found
@It may take many attempts before the correct
code is found
_2_When the correct code is found
store
41
Loading ...
Loading ...
Loading ...