Loading ...
Loading ...
Loading ...
CAREANDCLEANING
Self-CleaningCycle(cent.)
The Clean Cycle, including cooldown
time, is automatically set for 4 hours
and automatically turns off after the
set time, but you may change this
from 3 hours if oven is lightly soiled,
up to 5 hours if oven is heavily soiled.
O
Rw
.
Touch the CLEAN pad.
4 hours will show in
the display.
If you want to change
the length of clean time,
touch the HOUR !IP
and/or DOWN
arrow pads.
(_ 3. Touch the START pad.
The door locks automatically. The
display will show the clean time
remaining. It will not be possible to
open the oven door until the
temperature drops below the lock
temperature and the LOCKED light
goes off.
When the LOCKED light is off, open
the door.
The words LOCKED will flash and
the oven control will signal if you set
the clean cycle and forget to close
the oven door.
Touch the CLEAR/OFF pad. You will
need to wait for the oven temperature
to drop below the lock temperature
(approx. 1 hour) before attempting to
open the door.
After the cycle, you may notice some
white ash in the oven. Just wipe it up
with a damp cloth or sponge.
If white spots remain, scrub them
with a soap-filled steel-wool pad. Be
sure to rinse thoroughly. These are
usually deposits of salt that cannot
be removed during the cycle.
If your oven is equipped with
porcelain oven racks, it will be
necessary to grease the edges with a
light coating of vegetable oil after the
clean cycle. This will help maintain
the ease of sliding the racks in and
out of the oven.
If for any reason you are not
satisfied with the cleaning results,
just repeat the cycle.
Make sure the clock is set correctly.
(_) 1. Touch the
CLEAN pad.
2. If you want to change
the length of clean time
touch the HOUR/MIN
UP and/or DOWN
arrow pads.
3. Touch the DELAY
START pad.
4. Touch the HOUR/MIN
UP and/or DOWN
arrow pads to set the
time you prefer the
clean cycle to start.
(_ 5. Touch the
START pad.
30
Loading ...
Loading ...
Loading ...