Loading ...
Loading ...
Loading ...
Nugget Ice Maker
HOW TO USE
9
Ice Making
Remember to take out the ice scoop before making ice to avoid it being covered by the ice.
Heat insulation layer used for housing only helps slow down the melting of ice. The rate of melting
depends on ambient temperature. It's recommended to transfer ice to freezer for longer storage.
When the machine stops ice making triggered by , it will not continue to make ice until the ice is
fully/partially removed, or the lid is opened and closed. This is designed to save energy in case ice
melts and machine restarts making ice but no one is around.
If the ice maker is not to be used for some time, empty the water reservoir and dry it for storage.
The ice maker is designed to work quietly but will make some noise during operation.
·
·
·
·
Notes
·
6.The ice maker keeps making ice until the
ice basket is full, or the water runs low.
1.Ensure the drain hoses at the back of the
ice maker have been sealed and hung up
on the machine.
3.Open the lid, add potable water into water
reservoir, then close the lid. Be careful not to
exceed the “Max” water line.If it’s the first
time using this ice maker, read instructions
of “Before First Use” on page 6.
5.Wait for 15-30 minutes to enjoy fresh
nugget ice. Note that time of first ice is
affected by the ambient temperature and
water temperature.(Refer to page 6 for
temperature range.)
2.Plug into a 120V/60Hz wall outlet. Check
if the indicator flashes.
4.Press the “On/Off” button.
The indicator glows white solidly.
Figure 8
Figure 7
Figure 9
Loading ...
Loading ...
Loading ...