Loading ...
Loading ...
Loading ...
Nugget Ice Maker
HOW TO USE
8
should be kept for proper ventilation.
Remember to keep the environment dry and
stay away from heat sources such as ovens,
heaters and corrosive gases.
The ice maker generates some heat while it
is working, so a 6-inch clearance on all sides
3.Heat Dissipation
Magnetic switch in the lid works for the below two scenarios.
Scenario 2. The ice maker stops ice making when the water is not enough , it will not
continue to make ice until there’s enough water. When you open and close the lid, the
magnetic switch triggers water level detection. If there’s enough water for ice making, the
machine will resume ice making. Otherwise, the indicator of lights up again. Be aware
that if you connect the ice maker to a water supply, the action of opening and closing the lid
will trigger the magnetic switch to stop auto water refill and restart ice making.
4.Magnetic Switch
Short press “On/Off” button to turn off the ice maker. The machine will continue to work for
an extra 30-60s to remove the remaining ice from internal components, and it will
automatically stop working when the process is completed. The indicator keeps flashing
unless the ice maker is unplugged.
Note: When unplugging the ice maker, empty the ice basket to avoid overflow of water from
melted ice.
5.Turn Off the Ice Maker
Figure 6
Scenario 1. The ice maker stops ice making when the indicator is on.When you open and
close the lid, the magnetic switch triggers ice making. If the ice full infrared sensor (refer to
page 4) detects that the ice is not full, the machine continues ice making. Otherwise, the
indicator of lights up again. This is designed to save energy in case the ice melts and the
machine restarts making ice constantly but no one is around.
Loading ...
Loading ...
Loading ...