Loading ...
Loading ...
Loading ...
17
You may now connect your headboard to the attachment plates using
the remaining short bolts and nuts to secure it to the brackets. The
heads of the bolts will face outward. Use the 9/16” (14mm) socket
wrench and 1/2” (13mm) crescent wrench to tighten the bolts.
STEP 1 STEP 2
STEP 3
a.) Align the hole in the bracket to the brass sleeve into which the
leg threads. Hold the bracket in place and screw the leg into the
base until it is snug. DO NOT OVERTIGHTEN. Too much force
may cause the leg to spin freely.
b.) Align the tab with the hole in the frame (located towards the
foot of the base) and use a short bolt and nut to secure the
bracket. Make sure the bolt is tight.
Attach the plastic spacer and T-Bracket.
a.) Measure the distance between the mounting holes on the
headboard and install the spacer and attachment plate to
accommodate the headboard.
b.) To install the plastic spacer and attachment plate, you will need
(2) long bolts and (2) nuts. Place the spacer and attachment
plate in the desired location and slip the bolts through the holes
with the head of the bolt facing outward. Position the bolts
diagonally on the spacer. Use the 9/16” (14mm) socket wrench
and 1/2” (13mm) crescent wrench to tighten the bolts.
King/Cal King Headboard Brackets are an optional accessory and are not included.
A 9/16” (14mm) socket wrench and 1/2” (13mm) crescent wrench are necessary to complete installation.
headboard bracket installation guide (optional)
Loading ...
Loading ...
Loading ...