Loading ...
Loading ...
Loading ...
15
syncing two bases (optional)
A Sync Cord is included with Twing Long, Split Queen, and Split Cal King size bases.
The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases.
Disconnect the battery backup box cable from each control
box or splitter cable (make note where the cable was
plugged in).
Plug bases back into the power source.
If bases become mismatched, return both bases to the
flat position to re-sync the bases.
Connect the male end of each sync cord to control box
or splitter cable. Insert it into the same port that you
disconnected the battery backup box from in Step 2.
Check to ensure all cords are securely attached. Both
remotes will now operate both bases simultaneously.
Unplug the base(s) from power source.
Connect each battery backup box male connection to the
sync cord female connection (Refer to illustration at right).
STEP 3
STEP 6
STEP 2
STEP 5
STEP 1
STEP 4
PERFORMANCE NOTES
Battery Backup
Box 1
Sync Cord
Battery Backup
Box 2
Control Box 1 Control Box 2
The system is now linked. Pressed buttons on either remote
will control the two bases simultaneously.
Loading ...
Loading ...
Loading ...