Loading ...
Loading ...
Loading ...
14
AQUA - STOP
(CERTAIN MODELS ONLY)
(CERTAIN MODELS ONLY)
POPOLNI AQUA - STOP
354011
Do not immerse the Aqua-stop system inlet pipe into the
water, because it contains the electric valve!
In case of damage on the interior pipe, leaking is prevented by
automatic closing system which stops water inlet to the machine.
In such cases display (A) turns red. Inlet pipe must be replaced.
In case of damage on the interior pipe, leaking is prevented by
automatic closing system which stops water inlet to the machine.
Protection system will also detect whether there is any water
leakage in the washing machine interior. In such cases, washing is
suspended, water supply is cut off, and machine switches on the
pump and signals an error.
A
If your washing machine features both cold and hot water
attachments, but you only wish to connect it to the cold water
supply, please remove the hot water inlet hose from the back
of the appliance. Then, use the supplied cover to close the hot
water inlet. (picture 1)
If your washing machine allows connecting both hot and cold
water with total Aqua-Stop (option B), but you only wish to
connect it to the cold water supply, then seal the hot water tube
with a suitable 3/4" plug which is not attached to the machine.
The inlet hose should be tightened manually, firmly enough to
prevent any leaks. After tightening the hose, check for any leaks.
Use of pliers, wrenches, or other similar tools is not allowed when
installing the hose, as these tools can damage the nut thread.
Loading ...
Loading ...
Loading ...