Loading ...
Loading ...
Loading ...
WARNING
DONOTattempt any maintenance,adjustments or service
with engine and blade running. STOPengineand blade.
Disconnectspark plug wire and secureaway from spark
plug. Engineandcomponents are HOT.Avoid serious
burns, allow sufficient time for all components to cool.
CuttingHeightAdjustment
1. Pull the height adjusting lever(A, Figure 6) outward, and
move to the desired cutting height. Thehighest cutting
position is Notch 9 (B;also see Figure7). The lowest
cutting position is Notch 1 (C).
Note: The/ever wi// set aftwhee/sto the same cutting height.
WARNING
Stop engineand mower blade by releasingthe blade
control before adjusting cutting height.
1.50 in _ 4.00 in
Figure7: Cutting height settings (approximate)
RecyclingOperation
Note:Forbest recycling results, cut up to a maximum of 1/3
of grass blade length and recycleONLYwhen grass is dry.
1. Setthe height adjustment leverin the highest cutting
position (Notch 9). Referto the Section entitled "Cutting
HeightAdjustment".
2. Proceedmowing slowly. If the grass is very dense,
lower the height adjustment lever onenotch lower to
improve recycling performance.
InstallingtheDischargeDeflector
1. Raisethe recycling cover (A, Figure8).
Important. The recyclingcover should remainon the
machine at alltimes. Donot remove.
(:3
0
Figure6:Adjusting cutting height
Figure 8: Installing the discharge deflector
2. Install the deflector (B) to the deck underthe recycling
cover,making surethat:
Thetabs (C) hook under the pivot rod (D).
Thelocking tab on the deck (A, Figure9) goes
through the slot in the deflector (B).
3. Lowerthe recycling cover againstthe deflector.
Loading ...
Loading ...
Loading ...