Snapper 7800179 SPV21675 lawn mower

User Manual - Page 13

For 7800179.

PDF File Manual, 48 pages, Read Online | Download pdf file

7800179 photo
Loading ...
Loading ...
Loading ...
WARNING
DONOTattempt any maintenance,adjustments or service
with engine and blade running. STOPengineand blade.
Disconnectspark plug wire and secureaway from spark
plug. Engineandcomponents are HOT.Avoid serious
burns, allow sufficient time for all components to cool.
Wearheavy leathergloves when handling or working
around cutting blades. Bladesare extremelysharp and can
causesevereinjury.
MowerBladeReplacement
StandardBladeWearLimit
1. Inspect the blade(Figure 15) frequently for signs of
excessivewear or damage:
(A) New blade
(B) Wearlimit (notch starts)
(C) Dangerous condition! Do not useon the mower!
Replacewith a newblade.
Figure 15:Mower blade wearfimits
WARNING
DONOTuse a cutting bladethat shows signsof excessive
wear or damage.Refer to the Section entitled "MOWER
BLADEREPLACEMENT"for proper blade inspection and
service procedures.
BladeSharpening
1. Disconnectthe sparkplug wire and securethe end away
from the plug.
2. Tilt the mower up on its rearwheels. Donot tilt the
mower with the spark plug or carburetor down.
Important: Drain the fuel tank beforetipping the mower. DO
NOTtip the machine with the carburetor or spark plug down.
Oil from the crankcasewill saturatethe air filter and cause
the engine to be hardto start or not start at all. If
contamination doesoccur, the air filter will haveto be
replaced.
3. Removethe blade (B, Figure16).
Makesure that
bladehub is seated
[betweenf anges
Figure 16: Removingthe mower blade
4. Sharpenthe bladeon a grinding wheel at an angle of 22
to 28 degrees(B, Figure 17). DONOTsharpenthe blade
beyondthe original cutting edge(A).
5. Checkbladefor balance.If necessary,correct balanceby
grinding heavyend of blade.
6. Reinstallblade(B, Figure16). Note the correct assem-
bly order:
(A) Blade hub
(B) Blade
(C) Bladeflange (facing up)
(D) Conewasher (concave side up)
(E) Capscrew
7. Checktorque of blade retainingcap screw.
Recommendedtorque should be 40 ft. Ibs.
Do not sharpen
beyondoriginal
cutting edge
Endview of
bladeassembly
Figure 17: Sharpeningthe mower blade
ยข'J
13
Loading ...
Loading ...
Loading ...