Kenmore 79661622310 Elite Dryer

Use & Care Guide - Page 8

For 79661622310. Also, The document are for others Kenmore models: 796.6162*, 796.7162*

PDF File Manual, 70 pages, Read Online | Download pdf file

79661622310 photo
Loading ...
Loading ...
Loading ...
KEY DIMENSIONS AND SPECiFiCATiONS
Description Dryer Dryer (Gas and Electric)
Electrical Requirements Refer to the rating label
Gas Requirements _ NG: 4-10.5 inches WC
Gas Requirements _ LP: 8-13 inches WC
Dimensions 27 in. (W) X 29.4 in. (D) X 45 in. (H), 50 1/4 in. (D with door open)
68.6 cm (W) X 73.4 cm (D) X 114,1 cm (H), 12Z5 cm (D with door open)
Net Weight Electric : 135.2 lb. (61.3kg) Gas : !38.9 lb. (63kg)
Drying Capacity IEC 7.3 cu. ft.
_Gas Models Only
LOCATION REQUIREMENTS
iMPORTANT: Read all installation instructions
completely before installing and operating your dryer.
it is important that you review this entire manual before
installing and using your dryer. It contains detailed
instructions concerning electrical connections, gas
connections and exhaust requirements.
CHOOSE THE PROPER LOCATION
° Store and install the dryer where it will not be exposed
to temperatures below freezing or exposed to outdoor
weather conditions.
Choose a location with a solid, level floor.
"If the dryer is being installed in a garage, place the
dryer at least 18 inches (45.7cm) above the floor.
"Properly ground the dryer to conform with all
governing codes and ordinances.
"To reduce the risk of electric shock, do not install the
dryer in damp or wet locations.
IMPORTANT= If you are installing your dryer in a
manufactured or mobile home, please refer to the
Special Electrical Requirements for Mobile or
Manufactured Homes section.
Most installations require a minimum 5 1/2inch (14 cm)
clearance behind the dryer for the exhaust ducting.
° AHow minimum clearances of at least 1 inch (2.5 cm)
on the sides and back to minimize vibration and noise.
° Allowing additional clearance for installation and
servicing is recommended.
Be sure to allow for wall, door, or floor moldings that
may increase the required clearances.
Allow at least 21 inches (53.3 cm) in front of the dryer
to open the door.
L_J
21 l/4"
(54 cm) /
1"--..I 1"
4"
(68.6 crn)
50 !/4"
(127.5 cm)
3 _¸_ ,_
(7,6 cm) _
48in._ i
(310 cm)
34 in, _
(155 cm) .
3" v
(7.6 ¢m) _
Closet Door Clearance Requirements
Additiona| instructions for closet installations:
The closet door must allow for sufficient airflow. Refer to the
diagram above for minimum vent opening requirements. A
Iouvered door is also acceptable.
Loading ...
Loading ...
Loading ...