Loading ...
Loading ...
Loading ...
| CYCLE MODIRER BUTTONS
Each cycle has default settingsthat are selected
automatically. "Youmay also customize these settings
using the cycle modifier buttons.
AUTO DRY cycles are designed to properly care for
specific fabrics and loads. As a result, not all settings are
available for each cycle selection.
TIMED DRY cycles have default settings, but you may
also customize the temperature setting and add options.
Settings are not limited in most timed dry cycles. Use
care when setting options and modifiers for these cycles
to prevent damage to your clothing.
NOTE: To protect your garments, not every dry level,
temperature, or option is available with every cycle.
MODIFIERS
÷ Extra High
÷ High
o Medium
0 Low
® Air Only
Temp ][
÷ Extra Dry
g e
e Normal
@ •
g Damp Dry
Dry Level
0 Check Vent
@ Add V_/ater
÷ 4O
÷ 30
÷ 20
][ Timed Dry ]
O EMP
Adjusts the temperature setting from AIR ONLY
to EXTRA HIGH. This allows precise care of your
fabrics and garments. Pressthe TEMP button
repeatedly to scroll through available settings.
Temperature settings are not adjustable in AUTO
DRY cycles.
O RY LEVEL
Sets the level of dryness for the selected AUTO DRY
cycle. Pressthe DRY LEVEL button repeatedly to
scroll through available settings. Use this button to
adjust the dryness of the articles in the load to your
preference.
oThis option is not available with TIMED DRY cycles.
• The dryer wiW automatically adjust the cycle time.
" Selecting EXTRA DRY will increase the cycle time
and dry level, while DAMP DRY will decrease the
cycle time and dry level.
° Use the DAMP DRY setting for items that you wish
to iron or hang for final drying.
@
O
TIMED DRY
Allows you to manually select 20, 30 or 40 minutes
of dry time. Use the MORE TIME/LESS TIME buttons
to increase or decrease the selected drying time in
]-minute increments. Pressand hold the MORE TIME
or LESSTIME buttons to rapidly change the time.
CHECK VENT
(Duct Blockage Sensing System)
The CHECK VENT (Duct blockage sensing system)
detects and alerts you to blockages in the exhaust
system that reduce airflow from the dryer.
Maintaining clean exhaust system ducts improves
operating efficiency and helps minimize service
calls, saving you money.
ADD WATER
If the steam feeder runs low on water, the ADD
VVATER light will blink and the cycle will cancel.
Refill the steam feeder and then restart the cycle.
24
Loading ...
Loading ...
Loading ...