Vitamix 68051 FoodCycler FC-50

User Manual - Page 11

For 68051.

PDF File Manual, 32 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
11
MANUAL RESET INSTRUCTIONS
A manual reset is necessary if the FoodCycler’s operating system needs to be reset. Follow these instructions to properly complete a manual reset:
1. Plug the unit’s power cord into an outlet.
2. Press and hold the On/O ( ) button for upwards of 3 seconds, until you hear a beep and the unit shuts o.
3. Unplug your unit for 1 minute.
4. Plug your unit back in and wait ten seconds.
5. Press the On/O button ( ) as you normally would to start a cycle.
Note: If the Manual Reset does not work the first time, perform the manual reset again. If this doesn’t fix the issue, contact Vitamix Customer Service for
instructions.
IF YOUR MACHINE IS OVERLOADED (DRYING INDICATOR LIGHT IS FLASHING)
1. Unplug the unit and allow to cool for at least 35 minutes.
2. Remove the processing lid.
3. Look to see if any food waste is in the unit after the bucket is removed. Remove any food waste that might be inside the unit.
4. Remove the bucket.
There is a gear on the underside of the bucket. Turn it counterclockwise.
If the grinding arms turn without an issue, proceed to STEP 5 without emptying the bucket.
If the grinding arms turn with hesitation or won’t turn at all, remove all food waste from the bucket and try to rotate the gear again. If the prob-
lem persists, contact Vitamix Customer Service for instructions.
5. Look inside the bucket. Look to see if food waste is above the max fill line. If food waste is above that line, you have overfilled the bucket. Remove
some food waste until the top of the material is below the max fill line. Install the bucket. Plug the unit it. Attach the lid and begin the process again.
The machine will start with the drying cycle.
6. If the material is not above the max fill line and the machine is overloaded, pieces of the food waste might be too large or the material is not ideal for
use in the FoodCycler. See page 7, paragraph 9 for parameters about loading the bucket.
7. If the problem persists after trying to diagnose with these steps, contact Vitamix Customer Service for instructions.
Loading ...
Loading ...
Loading ...