Loading ...
Loading ...
Loading ...
Installation
English22
Installation
*
A
(*): Min. 6 in. (152 mm), Max. 8 in.
(203 mm)
3. Route the drain hose to the drain
system.
CAUTION
• If using a standpipe, make sure the
standpipe and drain hose connection is
not airtight.
• If using a standpipe, make sure the
drain hose is between 6 in. (152 mm)
and 8 in. (203 mm) inside the standpipe.
4. Secure the drain hose with cable ties.
AA
Over the edge of a wash basin
The drain hose must be placed at a height
of between 24 in. (60 cm) and 35 in.
(90 cm) from the oor. To keep the spout
of the drain hose bent, use the supplied
plastic hose guide (A). Secure the guide
to the wall using a hook to ensure stable
drainage.
STEP 4 Level the washer
A
1. Slide the washer into position.
2. Open the lid and check the pulsator. If
the washer is level, the pulsator (A) will
be positioned at the center of the tub.
Untitled-5 22 2019-01-22 11:33:09
Loading ...
Loading ...
Loading ...