Loading ...
Loading ...
Loading ...
en Display
22
--------
} Remote Start lights up: Remote start function is activated.
~ Page 25
£ Energy manager Lit: appliance is connected to the smart energy system
(Energy manager) (not available in every country)
ð Empty the condensa-
tion container
~ Page 31
■ Empty the condensation container and then rein-
sert it.~ Page 31
Then press Start/ A Reload/Pause .
■ Clean the filter in the condensation container.
■ If the optional drain hose* is installed, make sure
that the drain hose:
– Is correctly connected. ~ Page 42
– Is not kinked or bent.
– Is not blocked or clogged, e.g. by deposits.
■ Run the intensive appliance care programme.
■ Check that no debris has found its way into the base
unit. Open the maintenance flap and remove any
debris.
õ Base unit Cleaning the base unit ~ Page 45
ó Automatic heat
exchanger rinse
The heat exchanger is being cleaned automatically. Do
not pull out the condensation container or cancel the
programme while this is displayed.
’§“ Basic appliance care
programme
Not a fault. After a certain period, the appliance will
automatically recommend that you run the basic appli-
ance care programme. Run the basic appliance care
programme. ~ Page 51
•©£ CoolDown The appliance can reach high temperatures when dry-
ing. The CoolDown process reduces the temperature to
prevent damage to the laundry when you:
■ Pause the programme
■ Cancel the programme
■ Switch off the appliance via the app
The CoolDown process does not start until 30 seconds
after pausing/cancelling the programme or switching
off the appliance via the app. You can continue to oper-
ate the appliance during the CoolDown process.
Notes
■ The drum continues to rotate during the CoolDown
process, even if you have paused the programme.
■ Do not change the programme during the
CoolDown process.
■ Temperature regulation can take up to 10 minutes.
Loading ...
Loading ...
Loading ...