Loading ...
Loading ...
Loading ...
6
1. Be sure power is on, insert USB flash disk or Mp3 player into USB port and/or insert
MEMORY CARD (SD/MMC) into SD socket.
2. Set FUNCTION switch to USB/SD position
3. The device supports for Mp3 and WMA formats. During play status, press PLAY/PAUSE
button once to halt playing, press it again to continue.
4. Press PREV once to play the preview song, hold down continuously to speed up selecting
backward. Press NEXT once to play next one, holds down continuously to speed up selecting
forward.
5. EQ Function: You can press "EQ" button to choose different sound effects.E1 is for Normal; E
2, POP; E3, ROCK; E4, JAZZ; E5, CLASSIC.
6. DELETE Function: When it is playing the music from U-Disk or SD Card, you can delete the
file by pressing the "DELETE" button about 2 seconds.
7. FOLDER+: By pressing this button, it can switch the stored music files (the music which you
have stored in memory devices ) and the recorded music files (the music which is recorded
from turntable, cassette and aux in). It works as USB-Card switch button.
8. Press STOP to end up the play.
PHONES OUTPUT/EARPHONE JACK
1. The turntable can be connected to amplifier or speakers by 3.5mm headphone
jack.
2. Private listen of earphone also can be realized through this jack.
TIPS FOR BETTER PERFORMANCE
1. When opening or closing the turntable cover, handle it gently, moving it either at the center or
equally from both sides.
2. Do not touch the stylus tip with your fingers; avoid bumping the stylus on the turntable mat or a
record’s edge
3. Clean the stylus tip frequently, using a soft brush with a back-to-front motion only.
4. If you use a stylus cleaning fluid, use it very sparingly.
5. Wipe the dust cover and turntable housing gently with a soft cloth. Use only a small amount of
mild detergent solution to clean the turntable and dust cover.
6. Never apply harsh chemicals or solvents to any part of the turntable system.
7. Prior to moving the turntable, always unplug it from the AC outlet and fasten the tone arm on
the tone arm rest with the vinyl twist-tie.
HOW TO REPLACE THE NEEDLE
To replace the needle, please refer to the instructions below.
Removing the needle form the cartridge
1. Place a screwdriver at the tip of the needle heads hell and push downwards in the
direction shown in sketch “A”
2. Remove the needle head shell by pulling it forwards and pushing downwards.
Inserting the needle
Loading ...
Loading ...