Loading ...
Loading ...
Loading ...
= TM
. OWERMATE CARE
Always foIIow all safety precautions when cleaning
and servlclng the POWER-MATE TM,
WARNING
Elecl#cal Shock Or Persona}injuryHazard
Disconnect electrical supply before servicing or
cleanlng lhe unlL Failure to do so could result in
electrical shock or personal injury from cleaner
suddenly starting,
........................ i i i i i i
UGHTBULBCHANGING
1, Remove iight
cover by pressing in
and ilffing both sides
as shown.
2_PushInand turn
bulb counterclock-
wise to remove
3. Replace the butb.
Bulb must not be
htgher than 15
Wafts Close light
cover until It snaps in
place
NOTE: See PARTSAND FEATURESfor Bulb #
_ELTCHANGINGAND BRUSHCLEANING
Disconnect cleaner from electrical oullet. Check
and remove hair,stringand tintbulld-upfrequently
inthe POWER-MATE TM b_ush and brush support areas_
If build-up becomes excessive, dtsconneci POWER-
MATE TM fFom wand and follow the steps below,,
Instructions can also be found under the light cover
TO REMOVEBEE:
__ , ,, ,
!I ,
1. Remove ilght cover
and light bulb as
shown under UGHT
BULB CHANGING
2, Unscrew the
POWER_MATETM cover
screws.
3, Turn POWER-
MATETM over. To
remove cover.
Insert screw-
driver of cover
tabs on both
sides and twist
to release tabs
4. Turn POWER-
MATETM right side
up Press handle
release pedal
and lower the
swivel. TiIfcover
forward from
back until front
snaps free.
14
Loading ...
Loading ...
Loading ...