Loading ...
Loading ...
Loading ...
Operating 27
Operating
3
y You can check the recording percentage rate
for the USB record on the display window
during the recording. (MP3/ WMA le or
Audio CD Only)
y During recording MP3/WMA, there is no sound.
y For stable recording, the output sound level
goes down on its own when you record music
from CD to USB.
y You can only change volume level between
MIN and 30 during recording. (Only CD
function)
y When you stop recording during playback,
the le that has been recorded at that time
will be stored. (Except MP3/WMA les)
y Do not remove the USB device or turn off
the unit during USB recording. If does not, an
incomplete le may be made and not deleted
on PC.
y If USB recording does not work, the message
like “NO USB”, “ERROR”, “USB FULL”, “NOT
SUPPORT” or “FILE MAX” is displayed on the
display window.
y Multi card reader device or External HDD can
not be used for USB recording.
y A le is recorded by about 512 Mbyte when
you record for a long term.
,
Note
y You can record various sound using DJ
EFFECT, SCRATCH, DJ PRO or MIC. (Except
USB Copying)
y You can control recorded MIC sound
according to MIC volume.
y You may not store more than 2000 les.
y You can not record in AUTO DJ mode.
y On CD function, sound of MIC, SCRATCH,
DJ PRO or DJ EFFECT is recorded only during
AUDIO CD X1 speed REC. It is recorded
AUDIO CD source too.
y In case of the unsupported MP3/WMA le,
the le recording may be stopped.
y It’ll be stored as follows.
AUDIO CD MP3/WMA
The other source* Tuner
* : AUX and the like.
Tuner : The current recording frequency is shown.
,
Note
Loading ...
Loading ...
Loading ...