Loading ...
Loading ...
Loading ...
PURE CYCLE TM
Pure Cycle is a self-cleaning cycle that removes mold that may occur inside the washing machine.
1. Press the Power button,
2. Press the Pure CycmeTM button,
o Once the Pure Cycb button is pressed, the only
function that can be set is Delay Start,
3. Press the Start/Pause button,
o If you press the Start/Pause button, Pure Cycle
begins,
Pure
('yde'
CAUT!ON O
Using Pure Cycle, you can clean the drum without using a cleansing agent,
Never use Pure Cycle when laundry is in the washing machine, This may cause damage to
the laundry or a problem with the washing machine,
If you want to use drum cmeansing agent, use onmy1/10 of the amount of the drum
cleansing agent recommended by the cmeansing agent manufacturer. (When using a
powder-type cleansing agent, remove the liquid detergent compartment,)
The Pure Cycb Auto Indicator Function
o If the "Pure CycW' button is lit after a wash, it indicates
that tub (drum) cleaning is required. In this case, remove
the laundry from the washing machine, turn the power on,
and clean the drum by running Pure Cycle,
o If you do not run Pure Cycle, the "Pure Cycme" indicator
turns off. However, the "Pure Cycb" indicator will light
again after two washes. Not running Pure Cycb at this
point will not cause a problem with the washing machine,
o Although the Pure Cycle Auto Indicator appears once a
month or so, the frequency may differ depending on the
number of times the washing machine is used,
.............. .....................
maintainng your wasl!"_er 35
Loading ...
Loading ...
Loading ...