Kenmore 125.81714610 Bundle Ultra Plush Lightweight Bagged Canister Vacuum with Pet PowerMate, HEPA, Extended Telescoping Wand, Retractable Cord, and 3 Cleaning Tools, 700 Series

Use & Care Guide - Page 15

For 125.81714610. Series: 700 Series

PDF File Manual, 48 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
- 15 -
THERMAL PROTECTOR
This vacuum cleaner has a thermal
protector which automatically trips to
protect the vacuum cleaner from
overheating.
If a clog prevents the normal
ow of air to the motor, the thermal
pr
automatically. This allows the motor to
cool in order to prevent possible damage
to the vacuum cleaner.
To correct problem: Tg
vacuum cleaner to allow the vacuum
cleaner to cool and the thermal protector
to reset. Check for and remove clogs, if
necessary. Also check and replace any
roty
(50) minutes and plug the vacuum cleaner
in and turn back on to see if the motor
protector has reset.
If the canister motor does not resume
operation after the reset procedure
described above, have the unit serviced

PERFORMANCE/SAFETY FEATURES
CHECK BAG INDICATOR
When the vacuum cleaner is running with
normal ow, the light on the CHECK
BAG indicator is o. The light comes on
whenever the ow becomes blocked.
If that occurs, check the disposable dust
bag, motor safety  and other
possible clog locations shown in
REMOVING CLOGS (page 16).
To correct problem: See "Check Bag
Indicator activates" in
TROUBLESHOOTING (page 24).
NOTE: The light may come on when using
certain attachments, due to reduced ow
through attachment.
CHECK BAG
Indicator
WARNING
Personal Injury Hazard

cleaner before cleaning the agitator area
as agitator may suddenly restart. Failure
to do so can result in personal injury.
OVERLOAD PROTECTOR
The PowerMate
®
has built-in protection
against motor and belt damage should the
agitator jam. If the agitator slows down or
stops, the overload pr
PowerMate
®
. The canister motor will continue
to run.
To correct problem: T
vacuum cleaner, remove obstruction, then
press OVERLOAD PROTECTOR RESET
button.
If the PowerMate motor still does not run
after reset, have the unit serviced by a

ELECTRONIC SUCTION CONTROL
The electronic suction control allows you to
change the power of the vacuum cleaner
suction motor.
Increase suction
for upholsteries
and carpets.
Decrease suction
for draperies and
lightweight rugs.
Increase
Suction
SUCTION
CONTROL
Decrease
Suction
Loading ...
Loading ...
Loading ...