Loading ...
Loading ...
Loading ...
aus Operating the appliance
28
TimeLight (optical display
while a programme is
running) *
Ti meLi ght
*Depending on the features of your
dishwasher
While a programme is running, an
optical display (additional programme
information) is projected onto the floor
at the bottom of the appliance door. If
the base panel is pulled forwards or if
the appliance is installed at eye-level
flush with the furniture then this display
will not be visible. You can switch the
optical display on †:‹‚ or off †:‹‹.
Infolight *
Infoli ght
* depending on the configuration of
your specific dishwasher
While the programme is running, a light
spot shines on the floor under the
appliance door. Do not open the
appliance door until the light point is no
longer visible on the floor. If the
appliance door is not completely
closed, the light spot will flash *. If the
appliance is installed at eye-level, with
flush furniture front, the light point will
not be visible. You can switch the
Infolight on ‚:‹‚ or off ‚:‹‹.
Changing start programme *
Changi ng st ar t pr ogr amme
* depending on the features of your
dishwasher
You can change the “Start programme”
setting.
Tone volume
The end of the programme is indicated
by an audible signal. You can adjust the
tone volume from †–:‹‹ - †–:‹„.If the
signal tone at the end of the programme
is annoying, set the value to †–:‹‹
(tone volume off).
Button volume
When you are operating the dishwasher,
a signal sounds whenever a button is
pressed. You can adjust the volume of
the tone from ›–:‹‹ - ›–:‹„. If the
signal tone is annoying, set the value to
›–:‹‹ (button volume off).
Child-proof lock *
Chi l d- pr oof lock
*Depending on the features of your
dishwasher
The dishwasher features an electronic
child-proof lock. The child-proof lock
protects children from the potential
hazards posed by the dishwasher. You
can switch the child-proof lock on ™:‹‚
or off ™:‹‹. When the child-proof lock is
on, it is difficult to open the door.
Switching on the appliance
1. Turn tap fully on.
2. Switch on ON/OFF switch (.
The displays for the last programme
and last additional function selected
flash. These settings will be retained
unless another 0 programme key
is pressed. The expected
programme duration flashes on the
digital display h.
3. Press the START button `.
Programme sequence starts.
Loading ...
Loading ...
Loading ...