AEG L9FEB969C 9000 SoftWater 9kg

User Manual - Page 19

For L9FEB969C.

PDF File Manual, 56 pages, Read Online | Download pdf file

L9FEB969C photo
Loading ...
Loading ...
Loading ...
The compartment
Salt
can contain about
600 gr of salt that are sufficient for about
two months if the default water hardness
level (C04) is set and the water softener
is activated during wash phase only. A
different water hardness level or different
setting may increase or decrease the salt
consumption. Refer to 'How to set the
water hardness level' and 'How to set the
water softener also during rinse phase'.
The display shows the indicator when
compartment
Salt
needs to be refilled with
salt, even if a little salt still remains.
WARNING!
Pour the salt in the
compartment
Salt
only.
WARNING!
Do not put anything but salt
in the compartment
Salt
. If
any other detergent/additive
is poured inadvertently in
this compartment, please
refer to 'Eliminating
detergent or other additives
from salt compartment' in
'Troubleshooting' chapter.
Only use special salt for
dishwasher and/or washing
machine. The proper salt
can be ordered from the web
site!
Other types of salts are less
efficient and over time could
damage the water softener
technology permanently.
WARNING!
Do not use fine
salt!
The appliance works
exploiting its full potential
with salt. Salt refilling when
required by the appliance
maintains the softening
system efficient. If you use
the appliance without salt for
a long time, once the salt is
finally refilled, the water
softener function is
completely restored after a
few long washing cycles.
8.4 Water softener
regeneration
After a few cycles, the appliance may
need to regenerate the water softener.
The regeneration process is
automatically ensured when running
programmes such as Cottons and
Synthetics routinely, even if the
programme duration is reduced by taping
the Time Save button once.
The regeneration process is
automatically ensured when running
programmes such as Cottons and
Synthetics routinely.
Other programmes may perform the
regeneration process automatically,
when settings and conditions allow it.
If you usually run very short
cycles, the regeneration
process may not occur: you
could see that salt has not
been used, since it is
consumed during
regeneration phase only.
To ensure the regeneration
process run a Cottons or a
Synthetics programme
once a week or every two
weeks at least.
ENGLISH 19
Loading ...
Loading ...
Loading ...