GE - General Electric ZBD7105G02SS GE dishwasher

User Manual - Page 13

For ZBD7105G02SS.

PDF File Manual, 32 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Control Panel/Operation - ZBD7005 & ZBD7105
(h_(/'s 1.1%sher
Control
Settings
4. DELAY START-This option will allow you to delay the start time of any wash cycle except
RINSE ONI,Y fl_r up to 6 hours.
Select the delay start time you want by pressing the DELAY START button. Multiple pressing
will alternate the delay time between 2, 4 or 6 hours and OFF.
Start a
FVash Load
To start the Chef's Washer, open the Chef's X_'asher door so that the top-of door controls are
visible. The last used cycle will be displayed. To begin this cycle, press the START button. To select
a dilterent cycle, press the desired Cycle Selection and Option buttons, and then press the START
button. Atier the door is closed and latched, the selected cvcle will begin.
To hlterrupt/pause a cycle, gently open the door just enough to turn off the wash motor. Do not
flflly open the door until the wash action ceases.
_WARN1NG: Do not flfll) open door while the Chef's _'asher is in operation. Quickly oi)enin,*
the door while the Chef's _'asher is operating could result in serious scalding.
Be careflfl when opening the door; the hot steam that escapes when the door
is opened may cause injuries. Stand back as wm open the door and allow the
stealll to escape.
_AVERTISSEMENT : N'omrez pas conll)l_telnent la porte lorsque la laxeuse fonctionne. Une
ouverture rapide de la porte lorsque l'appareil est en tonctionnement
peut entrMner de s_rieuses bt filures. Faites attention lorsque vous ouw'ez
la porte; la wlpeur brfilante qui s'_chai)pe lots de l'ouverture de la porte
peut causer des blessures. Tenez wins en arribre lorsque wins ouw'ez la
porte afin de permettre _'lla vapeur de s'_chai)per.
To restart the wash process, close the door until it locks in place. There may be a time delav of
up to a tew minutes because the temperature inside the Chef's Washer needs to stabilize beti)re
it restarts the wash cycle.
To cm_cel the cycle after it has started, press and hold the START/CAN(:EI, button fl)r 3 seconds.
The Chef's X4'asher will start to drain and the cycle indicator lights will flash. At this point a new
wash cycle can be selected. If a new cycle is not selected, all the Cycle Indicator lights will go out
atter the Chef's Washer drains completely. If win have selected a new wash cycle, remember to
add more detergent to the detergent compartment if required.
13
Loading ...
Loading ...
Loading ...