Loading ...
Loading ...
Loading ...
49-7000174 Rev. 5 13
ENGLISH
STEP 4. INSTALL MOTOR
ASSEMBLY & GRILLE
Insert the motor assembly into the housing. Secure it in
place using the screws as shown and connect the motor
connector to the wiring plate.
Connect the light connector from the grille to the
wiring plate. Press the springs on the sides of the grille
together and insert them
into the slots in the motor
assembly. Firmly push the
attached grille up against
the ceiling.
Motor
Connector
Screws
PRODUCT REPLACEMENT
In case of Haier product replacement, follow the steps
below to replace unit:
WARNING
Disconnect all electrical power at
the main circuit breaker or fuse box before product
replacement.
1. Remove the grille from existing unit.
2. Unplug the motor and the light connectors from the
wiring plate of the current unit. Uninstall the motor
assembly by removing the screws and pulling it out of
the housing.
3. Discard the motor assembly and grille.
4. Unbox new unit and follow step 2 of this section to
remove motor assembly and light grill from new unit.
5. Install the new motor assembly into the existing
housing using the screws as shown in installation
instructions Step 4. Install motor assembly and grill.
6. Reinstall the grille and turn power on to test unit.
INSTALLATION
Loading ...
Loading ...
Loading ...