Loading ...
Loading ...
Loading ...
17
letter to indicate that a delayed cooking has been programmed. As soon as the delay time expires, the oven
starts and works for the programmed cooking time. The symbol is displayed.
At the end of any timed activity the control shuts down the oven, the buzzer sounds a warning sequence
(two short beeps repeated every 3 seconds) to recall the user attention, for a maximum time of 5 minutes and
makes the time related icons ( , )
flash on the display.
Touch any keys to silent the buzzer and reset the warning message. The buzzer
doesn’t sound between 22:00 and 8:00 (night mode).
Touch the [H] key in order to stop any activity.
Oven
functions
The control can manage many cooking functions, their number and availability depends on the oven model. The
temperature range is between 75°C and 250°C for most functions. Preset temperatures are mainly 190°C for
convection modes, 210°C for thermal modes and 230°C for grill functions.
Exceptions are Eco-Bake (preset=190°C), Pyrolyse (fixed 475°C), and warming mode which range is between
50°C and 120°C.
Booster
(Fast
Preheat)
This function allows one to fasten the oven preheating, saving time. When the oven temperature reaches the set-
point a continuous acoustic warning signal, about 5 seconds long, recall the attention of the user. Fast Preheat is not
available in Grill, Pyrolyse, Eco- Bake, Keep Warm and Defrost. Touch [A] key to enable the function, the writing
“Prh” appears on the clock display, the “°C” symbol on the temperature display flashes until the oven reaches the set
temperature.
Eco-Bake
This function is defined in order to obtain a consistent energy saving. The cooling fan is initially off and turns on only
when the inner parts temperature gets high, then it works with the heating elements. Cooking might be a little bit
slower than the standard Bake, especially when the oven is heavily loaded. When this function is active, the writing
“Eco” flashes every 5 seconds on the temperature display.
Defr
ost
This function is used to defrost frozen food in a short time. It doesn’t heat up the oven, only the convection fan
works. The temperature display shows dEF to indicate that this special mode is active.
Pyrolyse (Self-Clean) 9 VariPyro)
You can choose to set the pyro oven to clean between 1 and 3 hours.
Select the proper program to start a cleaning cycle. The temperature display show the writing -P- and the icon
display shows the elements in use. The clock display starts showing “Pyro” for a few seconds.
The clean time can be set according to the same rules of the automatic functions, and therefore the pyrolitic cycle
can be delayed.
The maximum allowed clean time is 3 hours, the minimum 1 hour. The standard time is 1h:30 min, the clock
display shows P1:30. At the end of the self-cleaning activity the display shows “---“ steady and flashing as
long as the oven is cooling and the door
remains locked. Once the oven is cool enough, the door unlocks and the
Loading ...
Loading ...
Loading ...