Loading ...
Loading ...
Loading ...
17
3. Mix a solution of equal parts mild detergent or liquid soap and water.
4. Turn all grill control knobs to OFF.
5. Ensure that the connections from the regulator to the grill and tank are tight and secure.
6. Completely open the shut-off valve. If you hear a rushing sound, turn gas off immediately. There is a major
leak at the connection. Correct before proceeding by calling the Coyote Customer Service line at
855-520-1559.
7. If no rushing sound, brush soapy solution onto all connection points.
8. If “growing” bubbles appear, there is a leak. Close the shut-off valve immediately and retighten
connections. If leaks cannot be stopped, do not try to repair the regulator, or shut-off valve, by yourself
and contact the Coyote Customer Service line at 855-520-1559.
NOTE: When leak testing this appliance, make sure to test and tighten all loose connections. A slight leak in
the system can result in a low flame, or a hazardous condition that could result in a fire or explosion.
Natural Gas Supply and Connection
1. Make sure all burner valves are in the “OFF” position
2. All NG units need to have a regulator and shut-off valve on the supply line.
3. All Pipe threads need to have proper, gas-rated, outdoor-rated thread sealant. Flare ends do not need or
utilize pipe sealant.
4. Your NG Coyote grill comes with a ½” regulator
a) Installer needs to seal the regulator to the hose using pipe sealant.
b) Then attach the flare end to manifold line, with no pipe sealant.
c) Next, attach connection hose (not included) to the other side of the NG regulator (it is also ½” MIP)
i. We suggest using ½” stainless steel corrugated hoses for all NG Grills
ii. Make sure that you purchase a hose of adequate length and capacity for the intended
application.
d) Connect the other end of this hose to shut-off valve
i. Depending on your choice of hose and shut-off, the nipple going into the shut-off valve may
vary.
e) Test all connections for leaks with a soap and water solution.
Coyote is not responsible for the selection or performance of the contractor or installer who performs the
connection of the natural gas supply to the grill.
Gas Conversions – Natural Gas and Propane
Coyote grills are able to be converted (a Coyote liquid propane grill can be converted to a natural gas grill or vice
versa), but you must obtain the correct conversion kit and we recommend that any gas appliance conversion should
be performed by a Licensed Plumber or a certified Installer. Conversion kits are sold for Coyote grills and can be
purchased through your dealer or Coyote’s Customer Service Department. Any other kit or orifices used that are not
of Coyote brand will automatically void any Coyote Warranty on the unit. Furthermore, it is important to understand
that wherever there is a burner, there is an orifice that will need to be changed (do not forget the rotisserie or sear
burner).
The steps for converting your Coyote grills main and sear burners are:
1. Pull grill out of island or cart.
2. Remove Drip Pan and Cooking Grates.
3. Unscrew bolt connecting the manifold pipe to the grill body, located at the back side of the grill.
Loading ...
Loading ...
Loading ...