Loading ...
Loading ...
Loading ...
- 10 -
Revision 12/2021
Copyright © 2021, Fast ČR, a.s.
temperature. You can set the temperature in the range from 18 to
32 °C.
• Use button FAN D9 to set the fan speed. Repeatedly press button
FAN D9 to switch the speed in the following order: High (high speed) –
Medium (medium speed) – Low (low speed) – Auto (automatic speed).
Each time the button is pressed, the arrow at the speed bar on the
display D1 will switch.
2. Fan mode
• Repeatedly press button MODE D3 until the arrow on the display D1
stops at symbol
.
• Use button FAN D9 to set the fan speed. Repeatedly press button
FAN D9 to switch the speed in the following order: High (high speed)
– Medium (medium speed) – Low (low speed). Each time the button is
pressed, the arrow at the speed bar on the display D1 will switch.
Note:
In the fan mode, it is not possible to set the temperature,
therefore no temperature information will be shown on the
display D1.
3. Dehumidification mode
• Repeatedly press button MODE D3 until the arrow on the display D1
stops at symbol
. “dH” is shown on the display D1.
• It is not possible to change the fan speed in the dehumidification
mode.
4. Automatic mode
• If you select an automatic mode, the portable air conditioner will
automatically select an operating mode based on the temperature in
the room.
• Repeatedly press button MODE D3 until the arrow on the display D1
stops at symbol
.
• Use button FAN D9 to set the fan speed. Repeatedly press button
FAN D9 to switch the speed in the following order: High (high speed) –
Medium (medium speed) – Low (low speed) – Auto (automatic speed).
Each time the button is pressed, the arrow at the speed bar on the
display D1 will switch.
• The portable air conditioner will start in the fan mode, when the
temperature in the room is less than 23 °C, and in the cooling mode
when the temperature in the room is higher than 23 °C.
Functions of the portable air conditioner
1. Sleep function
• The sleep function is used to reduce overnight power consumption,
when aconstant temperature is not necessary.
• Selecting an operating mode – cooling – see previous part of the
user’smanual.
• Press button D5, symbol
will appear on the display D1. The
portable air conditioner will run in the last selected mode.
• For the cooling mode, within two hours, the temperature will increase
by 2 °C. This new temperature will be maintained for aperiod of 6
hours and then the portable air conditioner will turn itself off.
• The sleep function can be cancelled at any time by pressing button
D5, D3 or D9.
• The sleep function cannot be set in the fan and dehumidification
modes.
2. Automatic start and shut-off function
Automatic start
• The automatic start function makes it possible to set atime after which
the portable air conditioner will start automatically.
• Start the portable air conditioner by pressing button D1. Using button
D3, select the operating mode in which you wish to turn on the
portable air conditioner. Use buttons ▲/▼ D7 and D8 to set the
desired temperature and use button D9 to select afan speed as
required. Turn off the portable air conditioner using button D1.
• Press button D4 twice, the time and symbol
will appear on
the display D1. Use buttons ▲/▼ D7 andD8 to set atime after which
the portable air conditioner will automatically start. The automatic
start time can be set in the range between 30 minutes and 24 hours
(set in 30 minute intervals until 10 hours, and one hour intervals until
24 hours).
• Press button D4 once to confirm the setting. The set time will appear
on the display D1 and symbol
will remain lit.
• Once the set time elapses, the portable air conditioner will start
automatically. If button D4 or D2 are pressed after the automatic start
is set, then this setting will automatically be cancelled.
Automatic shut-off
• The automatic shut-off function makes it possible to set atime after
which the portable air conditioner will shut off automatically.
• While the portable air conditioner is turned on, press button D4 once.
The time and symbol
will be shown on the display D1.
• Use buttons ▲/▼ D7 andD8 to set atime after which the portable
air conditioner will automatically turn off. The automatic shut-off time
can be set in the range between 30minutes and 24 hours (set in 30
minute intervals until 10 hours, and one hour intervals until 24 hours).
• Press button D4 once to confirm the setting. The set time will appear
on the display D1 and symbol
will remain lit.
• Once the set time elapses, the portable air conditioner will shut off
automatically. If button D4 or D2 are pressed after the automatic shut-
off is set, then this setting will automatically be cancelled.
3. Flap angle function
• Button D7 can be used to select either left or right air flow. Press
button D7 once, an arrow and symbol
will appear on the display
D1. Pressing button D7 will cause the arrow to disappear and the
function to be cancelled.
Changing temperature units
• While the air conditioner is in stand-by mode, press button D10 to
toggle the temperature units from °Cto °F and vice versa.
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTENANCE AND CLEANING
• Before cleaning the portable air conditioner, turn it off and wait afew
minutes, and then pull the power cord out of the power socket.
Cleaning the air filters
• If the portable air conditioner is used regularly, it is necessary to
clean the air filters at least once every 14 days to avoid the fan
from becoming clogged with dust. Based on the model of your air
conditioning unit, clean the following filters:
– Clean both the air filter located behind the removable protective
grille of the top air inlet A7, as well as the air filter located behind
the removable grille of the bottom air inlet A9.
• Carefully remove the protective grille and take out the respective
filters. To remove the dust, use avacuum cleaner. In the event of
greater soiling, wash the filter by hand in asolution of lukewarm water
(max. 40 °C) and neutral detergent. Then thoroughly rinse it under
running water and allow it to dry naturally. Do not dry it in aclothes
dryer or in direct sunlight. Once the filter is dry, you can install it back
in its place.
Note:
Do not use aportable air conditioner without the air filters
properly installed and do not use it with wet or damp air filters.
• The water collection (condensation) tank must be drained immediately
when the code “Ft” appears on the display C1 and also before this
appliance is stored in order to prevent the formation of moulds.
• In households with pets, it is necessary to wipe the grille regularly to
prevent it from becoming clogged by animal fur.
Cleaning the outer case
• To clean the outer case, use asoft wiping cloth dipped in asolution of
lukewarm water and neutral detergent. Then wipe the surface dry.
• When cleaning it, do not spray the portable air conditioner with water
or any other liquid, do not pour water on it or submerge it in water or in
any other liquid.
• Do not use abrasive cleaning products, solvents, petrol, etc. for
cleaning.
Loading ...
Loading ...
Loading ...