Loading ...
Loading ...
Loading ...
10 | P a g e
4. MAINTENANCE
- Before cleaning the cooler always remember to unplug it.
- Unplug the cooler at the electrical outlet; never pull the service cord.
- Do not use sharp objects for cleaning.
- Clean the inside cabinet of cooler with a clean damp cloth or with neutral soap. Avoid
damage by never using abrasive or flammable cleaning products.
- Clean the condenser every 6 – 12 months with a vacuum cleaner or a brush to eliminate the
dust accumulation. This is located at rear of unit at the bottom and is the big wire part.
- Do not wash the cooler with direct or high pressure water jets.
- Clean door seal annually using clean cloth and eucalyptus oil
- If you have purchased a stainless steel model, please see stainless steel care
5. TROUBLE SHOOTING
Often problems that occur during normal operation can be resolved without the assistance of
a specialized technician. Before calling the technical assistance, verify the following:
a) The appliance does not operate.
- Check that the plug is correctly inserted into the electrical outlet.
- Verify that there is voltage at the electrical outlet (Use another Appliance in same socket)
b) The product is too warm.
- Check the setting of the thermostat. (See 1.3 Testing Section)
- Check the closing of the door, and ensure door gasket seals.
- Check that the interior fan is operating, and not blocked.
- Check and clean the condenser located at rear bottom section near compressor
Loading ...
Loading ...
Loading ...