Loading ...
Loading ...
Loading ...
24
Before you call for service
User warnings
Your dryer is capable of diagnosing a number of its own problems. It will sound a continuous
series of beeps and display a code when it has a problem that you can correct yourself. All
control panel lights will turn off and a code will be displayed to inform you what the problem is.
To stop the beeps sounding, press any button on the control panel. Do not try to continue your
drying cycle once you stop the noise. You must address the problem the dryer is alerting you to.
Check this chart before you call for service.
Description Displayed as What should you do?
The lint filter is
blocked and needs to
be emptied
Empty the lint filter and then replace it.
Check the lint filter is not damaged.
Check there is nothing else stuck in the lint filter
holder which may be blocking the air flow.
Check the lint filter is in place correctly in your dryer.
The water tank is
full and needs to be
emptied
Check if the water tank is full.
Empty the water tank.
If using the drain hose, check whether the water tank
or drain hose is blocked.
Check the drain hose is still attached at the back of the
machine, and is not kinked or squashed.
The condenser needs
to be cleaned
Clean the condenser (refer to page 23). Ensure the
condenser unit has been placed correctly into your
dryer.
The door is not closed
Close the door fully and touch START/PAUSE.
Try opening and closing the door again.
Reposition the load, make sure the load is correctly in
the drum and that protruding items are not stopping
the door from closing.
Once you have addressed the issue the user warning was alerting you to, try using your dryer as
per usual.
If the symptom persists, call your Fisher & Paykel Authorised Repairer.
Loading ...
Loading ...
Loading ...