Loading ...
Loading ...
Loading ...
22
Caring for your dryer
When you have finished using your dryer
Unplug the machine from the power socket.
Wipe around the door to remove any remaining condensation and foreign matter.
Clear the lint filter and empty the water tank (if not set up to automatically drain).
Cleaning your AeroXL™
Before you start cleaning your dryer, ensure that it is disconnected from the power (ie unplug
the machine from the power socket).
Cleaning the control panel and outer surfaces of the dryer
Use a soft damp cloth to wipe all surfaces, then wipe dry. Avoid using chemical or scouring
cleaners, as these will damage the paint and plastic surfaces of your dryer.
Cleaning the inside of your dryer
It is important that you occasionally clean the inside of your dryer. If the drum has any residual
dirt or lint stuck to it, remove this and wipe it clean with a damp cloth. Do not leave any metal
objects in the drum, as these may cause rust.
Cleaning the lint filter
Lint is generally formed during wearing and washing. Fibres (ie lint) released from the clothes
during the drying cycle are collected in the lint filter.
It is important to clean the lint filter after every load, as the lint produced in the drying process
can become a fire hazard if it is allowed to accumulate in or around your dryer.
The lint filter is located in the door opening (at the bottom).
There is a warning light that will flash at the beginning of every cycle to remind you to clean the
filter and will stop once the START/PAUSE button is touched. The warning light will also flash on
and off during the cycle if the filter becomes blocked. The filter should be cleaned as soon as the
LINT FILTER light starts flashing. Lint becomes a fire hazard if left to build up, and will reduce the
efficiency of your dryer.
To clean the filter:
1
Open the dryer door.
2
Remove the lint filter by pulling it up and out of the filter slot.
Open it out and wipe the surface clean with your hand.
3
Close the lint filter and place it back in the opening. Ensure the
filter is fitted correctly back in place before operating the dryer.
Important!
If the lint filter becomes damaged, contact your Fisher & Paykel Authorised Repairer to arrange
getting a new filter. Do not operate your dryer with a damaged lint filter or without the filter in
place, as this will cause damage to your dryer.
Fig.20 Lint filter
Loading ...
Loading ...
Loading ...