Loading ...
Loading ...
Legal and Safety
Instructions
FCC Statements
FCC Part 15C 15.247, 15E 15.407 is applied to the modular
transmitter.
Federal Communication Commission Interference
Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harm-
ful interference to radio or television reception, which can
be determined by turning the equipment o and on, the
user is encouraged to try to correct the interference by one
of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit dier-
ent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV techni-
cian for help.
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modications not expressly
approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
This device and its antenna(s) must not be co-located
or operation in conjunction with any other antenna or
transmitter.
For product available in the USA/Canada market, only
channel 1~11 can be operated. Selection of other channels
is not possible. -
This device is going to be operated in 5.15~5.25GHz fre-
quency range, it is restricted in indoor environment only.
IMPORTANT NOTE:
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated with mini-
mum distance 20cm between the radiator & your body.
IC Statement
This Class B digital apparatus complies with Canadian
ICES-003.
This device complies with Industry Canada license-exempt
RSS standard(s).
Operation is subject to the following two conditions: (1)
this device may not cause interference, and (2) this device
must accept any interference, including interference that
may cause undesired operation of the device.
Cet appareil numérique de la classe B est conforme á la
norme NMB-003 du Canada.
Le psent appareil est conforme aux CNR d’Industrie
Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible
d’en compromettre le fonctionnement.
Any changes or modications not expressly approved by
the manufacturer could void the user’s authority to operate
this equipment.
This device and its antenna(s) must not be co-located
or operation in conjunction with any other antenna or
transmitter.
For product available in the USA/Canada market, only
channel 1~11 can be operated. Selection of other channels
is not possible. -
Pour les produits disponibles aux États-Unis / Canada du
marc, seul le canal 1 ~ 11 peuvent être explois. Sélec-
tion d’autres canaux nest pas possible.
This radio transmitter (identify the device by certication
number or model number if Category II) has been approved
by Industry Canada to operate with the antenna types
listed below with the maximum permissible gain indicated.
Antenna types not included in this list, having a gain
greater than the maximum gain indicated for that type, are
strictly prohibited for use with this device.
The device could automatically discontinue transmission in
case of absence of information to transmit, or operational
failure. Note that this is not intended to prohibit transmis-
sion of control or signaling information or the use of repeti-
tive codes where required by the technology.
The device for the band 5150-5250 MHz is only for indoor
usage to reduce potential for harmful interference to co-
channel mobile satellite systems.
les dispositifs fonctionnant dans la bande 5150-5250 MHz
sont réservés uniquement pour une utilisation à l’intérieur
an de réduire les risques de brouillage préjudiciable aux
systèmes de satellites mobiles utilisant les mêmes canaux.
The maximum antenna gain permitted (for devices in the
bands 5250-5350 MHz and 5470-5725 MHz) to comply with
the e.i.r.p. limit. The maximum antenna gain permitted (for
devices in the band 5725-5825 MHz) to comply with the
e.i.r.p. limits specied for point-to-point and non point-to-
point operation as appropriate. High-power radars are al-
located as primary users (meaning they have priority) of the
bands 5250-5350 MHz and 5650-5850 MHz and these radars
could cause interference and/or damage to LE-LAN devices.
Devices is not capable of transmitting in the band 5600-
5650 MHz. This restriction is for the protection of Environ-
ment Canada’s weather radars operating in this band.
IMPORTANT NOTE:
IC Radiation Exposure Statement
This equipment complies with IC RSS-102 radiation expo-
sure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum
distance 20cm between the radiator & your body.
Cet équipement est conforme aux limites d’exposition
aux rayonnements IC établies pour unenvironnement
non contrôlé. Cet équipement doit être installé et utilisé
avec un minimum de 20cm de distance entre la source de
rayonnement et votre corps.
Transmit Antenna Notice
This radio transmitter [IC: 21098-ESPWROOM32D] has
been approved by Innovation, Science and Economic Devel-
opment Canada to operate with the antenna types listed
below, with the maximum permissible gain indicated. An-
tenna types not included in this list that have a gain greater
than the maximum gain indicated for any type listed are
strictly prohibited for use with this device.
Antenna list ( type, maximum gain(dBi) )
Model Type Maximum Gain (dBi)
General Safety Information
Caution: When using electrical appliances, observe the
following basic precautions to reduce the risk of re,
electric shock, and injury. Please read all tips and warn-
ings before using your Rabbit Air® purier.
Use only as directed by the Owner’s Manual.
Please observe extreme caution when using the air puri-
er in close proximity to children.
Rabbit Air puriers are for indoor use only.
Rabbit Air puriers are not intended for use in bath-
rooms, laundry areas, or other damp indoor environ-
ments. Keep Rabbit Air puriers away from water at all
times.
Do not use Rabbit Air puriers near replaces or in areas
where ammable or combustible products or vapors
may be present.
This appliance is not intended for use by persons (includ-
ing children) with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge
unless they have been given supervision or instruction
concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure they do not
play with the appliance.
This product complies with the maximum allowable con-
centration of ozone of 0.050 parts per million by volume
(ppmv) in a 24-hour period. The Health Canada Guideline
2010 recommends that the maximum exposure limit,
based on an averaging time of 8 hours, is 0.020 ppmv or
less when tested in a sealed, controlled room aproxi-
mately 30 m³.
Electrical Safety Instructions
Rabbit Air puriers are designed for use in a 120 V outlet
only.
Turn o your Rabbit Air purier before unplugging it
from the power outlet.
Unplug the Rabbit Air purier from the power outlet
when not in use and before servicing or cleaning the
unit.
To reduce the risk of electric shock, the purier has a
polarized plug, which means it will t into a polarized
outlet only one way. If the plug does not t into the
outlet, reverse the plug. If it still does not t, contact
qualied personnel to install the proper outlet. Do not
alter the plug in any way.
To avoid electric shock, do not touch the air purier or
its power plug with wet hands.
Keep the electrical cord away from heated surfaces at
all times.
If the cord or plug appears damaged, return the unit
immediately to an authorized service facility for exami-
nation and repair.
Only use Rabbit Air’s dedicated power cord that came
with your air purier.
Always connect power cord to air purier rst and en-
sure it is fully inserted before connecting to your outlet.
Any attempts to repair a Rabbit Air purier without writ-
ten permission from Rabbit Air will void the warranty
and could cause serious personal injury to the user and/
or result in severe damage to the unit.
Do not pull, carry, lift, or drag the Rabbit Air purier by
pulling its power cord. Remove the power plug from its
outlet by grasping the plug and pulling gently.
When the Rabbit Air purier is plugged into a power
outlet, keep all ngers, body parts, hair, jewelry, and
loose clothing away from the openings.
Installation Guidelines
Avoid putting the Rabbit Air purier in a place where the
air intake or air outlet could become clogged with dirt.
Leave at least two feet of clearance around the air puri-
er’s intake and outlet.
Operations Guidelines
Do not block the air intake or air outlet.
Do not use air purier on or around hot surfaces.
Do not use the air purier in a room where it may come
into contact with steam.
Do not operate air purier on its side.
Do not operate air purier in greasy or damp environ-
ments.
Do not use detergent or soap to clean air purier.
Do not operate the Rabbit Air purier without lters.
Do not wash and reuse the lters except for the wash-
able Pre-Filter.
Childproof feature pauses air purier operation when
the Front Panel is removed.
Rabbit Air - 5 4
Loading ...
Loading ...
Loading ...