Loading ...
Loading ...
Loading ...
Timer
26
Auto switch off
You can set a time after which a heater
element/Tepan Yaki zone will switch off
automatically. This function can be
used for all cooking zones at the same
time.
If the time programmed is longer than
the maximum operating time allowed,
the heater element/Tepan Yaki zone
will be switched off by the safety
switch-off function (see “Safety fea-
tures – Safety switch-off”).
The switch-off time is set on the numer-
ical display for each cooking zone you
want to switch off automatically.
Setting the switch-off time
Select a power level for the desired
heater element/Tepan Yaki zone.
Touch the sensor control.
The timer display flashes.
Set the required duration.
Touch the sensor control or wait
10seconds to start the switch-off time.
The heater element allocation auto
switch off indicator light pulsates.
If you want to set a switch-off time for
another heater element/Tepan Yaki
zone, follow the same steps as de-
scribed above.
If more than one switch-off time is
programmed, the shortest time left will
be displayed, and the corresponding
indicator light will pulsate. The other
indicator lights will light up constantly.
If you want to show the times left
counting down in the background,
touch the sensor control of the de-
sired heater element/Tepan Yaki zone.
Changing the switch-off time
Touch the sensor control re-
peatedly until the indicator light for
the required heater element/Tepan
Yaki zone pulsates.
The timer display flashes.
Set the required duration.
Deleting the switch-off time
Touch the sensor control re-
peatedly until the indicator light for
the required heater element/Tepan
Yaki zone pulsates.
The timer display flashes.
Touch the sensor control on the nu-
merical display.
Loading ...
Loading ...
Loading ...