Loading ...
Loading ...
Loading ...
6 www.dimplex.com
Fireplace Installation
WARNING: Ensure the power
cord is not installed so that it is
pinched or against a sharp edge
and ensure that the power cord is
stored or secured to avoid trip-
ping or snagging to reduce the risk
of re, electric shock or injury to
persons.
WARNING: Construction and
electrical outlet wiring must comply
with local building codes and other
applicable regulations to reduce
the risk of re, electric shock and
injury to persons.
WARNING: Do not attempt
to wire your own new outlets or
circuits. To reduce the risk of re,
electric shock or injury to persons,
always use a licensed electrician.
WARNING: To reduce the risk
of re, do not store or use gaso-
line or other ammable vapors or
liquids in the vicinity of the heater.
Glass Installation
(if applicable)
1. Unpack the rebox and the
front glass.
2. Remove the glass retaining
bracket from one side of the
rebox. (Figure 1)
3. Slide the glass into the glass
support track on both the top
and the bottom, until it is fully
inserted.
4. Replace the glass retaining
bracket.
Dimplex Mantel Installation
Depending on the available space
within the mantel cavity, the unit
can be secured to the mantel at
the bottom side or back. Remove
the screw on the bottom ange
in the most appropriate place for
securing and using the provided
L-bracket and the screw that was
removed attach the rebox to the
mantel. (Figure 2)
!
NOTE: There are no guide
holes provided for the L-Brackets
in the mantel.
Figure 1
Loading ...
Loading ...
Loading ...