Loading ...
Loading ...
Loading ...
Shuts off before load is dry
Lint on clothes
Garments still wdnkled after
Wdnkle Release
Odors remain in clothing
after Air Fluff.
The dryer load is too small. Add more items or a few towels and
restart the cycle.
The dryer load is too large. Remove some items and restart the dryer.
Make sure the lint filter is cleaned before every load. With some loads
that produce high amounts of lint, it may be necessary to clean the
filter during the cycle.
Some fabrics are lint producers (for example, a fuzzy white cotton
towel) and they should be dried separately from clothes that are lint
trapPers (for example, a pair of black linen pants).
Divide larger loads into smaller loads for drying
Check pockets thoroughly before washing and drying clothes.
Small loads of 1 to 4 items work best.
Load fewer garments. Load similar-type garments.
Fabrics containing strong odors should be washed in a normal cycle.
iNFORMATiON CODES
Information codes may be displayed to help you understand what is occurring with your dryer better.
tE Clogged Lint Screen Clean the screen or vent.
Vent is restricted If the problem continues, call for service.
Invalid heating Temp when the dryer Call for service.
is running
dE Running the dryer with door open Close the door and then restart.
If the problem continues, call for service.
Door is not closing properly Call for service.
dF
bE2
FE ...........
Unit detects a button is being
pressed for over 30secs or button is
stuck
Invalid power source frequency
Make sure a button is NOT being pressed
continuously. Try restarting the cycle.
If the problem continues, call for service.
Try restarting the cycle.
If the problem continues, call for service.
Electronic Control Problem Call for service.
(Communication Error)
Electronic Control Problem Call for service.
....... (Over Voltage Error)
For any codes not listed above, call 1-800-726-7864 (1-800-SAMSUNG)
Loading ...
Loading ...
Loading ...