Loading ...
Loading ...
Loading ...
23
SPECIAL FUNCTIONS
CLEAN WASHER
Detergent residue can build up in the wash
drum over time and can lead to a mildewy
or musty smell. The CLEAN WASHER cycle
is specially designed to remove this buildup
using bleach or another cleaner designed specically for
cleaning front load washers. Run the CLEAN WASHER
cycle once a month, or more often under heavy use
conditions or if odor is present.
See complete instructions in the CARE AND CLEANING
section.
1
Turn ON the washer and press and hold the ACCELA
WASH button for three seconds. Selecting any other
cycle after CLEAN WASHER has been selected will
cause the CLEAN WASHER cycle to be cancelled.
2
Fill the bleach dispenser to the MAX line with liquid
chlorine bleach. Do not overll the bleach dispenser.
Overlling will cause the bleach to dispense
immediately.
NOTE:
For other drum cleaning products, follow
the cleaner manufacturer’s instructions and
recommendations. For powdered cleaning products,
add the cleaner to the main wash compartment of
the dispenser drawer. Place tablet cleaners directly
into the drum.
3
Press the START/PAUSE button to start the cycle.
4
After the cycle has ended, secure the door slightly
ajar with the door magnet. This will promote air
circulation and allow the interior of the machine to
dry. To use this feature, close the door just until it
contacts the door magnet.
NOTE:
Do NOT use this cycle with clothes, and do
NOT add detergent or fabric softener.
AUTO SOAK
Use the AUTO SOAK option to presoak
garments to help remove dicult spots or
stains on fabric. This option provides a
30-minute presoak prior to the start of the
selected cycle. At the end of the presoak time, the
selected cycle will use the same water.
To use the AUTO SOAK feature, press and hold the
STEAM TREAT button for three seconds.
ENERGY SAVER
This option saves energy by using cooler
water while increasing the wash and rinse
times to maintain wash performance. This
feature is only available with the NORMAL/
CASUAL and HEAVY DUTY cycles as listed below.
To use the Energy Saver option, press and hold the PRE
WASH button for three seconds.
• NORMAL – Hot becomes Warm
• NORMAL – Warm becomes Cold
• HEAVY DUTY – Hot becomes Warm
HOW TO USE
DRUM LIGHT
The drum is equipped with a blue LED light
that illuminates when the washer is turned
on. This light automatically turns o when
the door is closed and the cycle starts.
To turn on the light during a cycle, press and hold the
EXTRA RINSE button for three seconds. The drum light
will illuminate and then turn o automatically after four
minutes.
NOTE:
Clothes may appear to be yellow in the washer
while the drum light is on. This eect is caused by the
reection of the light.
CONTROL LOCK
Use this option to disable the controls. The
washer can only be locked during a cycle.
This feature can prevent children from
changing cycles or operating the machine.
Once set, the controls remain locked and Control Lock
must be turned OFF before the controls can be used
again. Once the washer has shut o, the power button
will allow the machine to be turned ON, but the controls
will still be locked. When the controls are locked, “CL”
will display alternately with the estimated time remaining.
Press and hold the STAY FRESH button for three seconds
to activate or deactivate the controls.
CHIME
Press and hold DRY LEVEL button for
3 seconds to set the volume of the
chime and keypad tones. You can turn
the end-of-cycle chime and keypad
tones ON or OFF with the CHIME
function.
1-MFL68005553-영.indd 23 2018. 8. 29. 오전 10:42
Loading ...
Loading ...
Loading ...