Loading ...
Loading ...
Loading ...
32
CARE & CLEANING
Care and Cleaning Tips
Part Cleaning
Agents
Tips and Precautions
Interior &
Door Liners
• Soap and water
• Baking soda
and water
• Use two tablespoons of baking soda in one quart of
warm water.
• Be sure to wring excess water out of sponge or cloth
before cleaning around controls, light bulb or any
electrical part.
Door Gaskets • Soap and water • Wipe gaskets with a clean soft cloth.
Drawers &
Bins
• Soap and water • Use a soft cloth to clean drawer runners and tracks.
• Do not wash any removable items (bins, drawers, etc.)
in dishwasher.
Glass
Shelves
• Soap and water
• Glass cleaner
• Mild liquid sprays
• Allow glass to warm to room temperature before
immersing in warm water.
Toe Grille • Soap and water
• Mild liquid sprays
• Vacuum
• Remove toe grille (see Installation Instructions).
• Vacuum both sides and wipe with sudsy cloth or
sponge. Rinse and dry.
Exterior &
Handles
• Soap and water
• Non abrasive
glass cleaner
• Do not use commercial household cleaners containing
ammonia, bleach or alcohol to clean handles.
• Use a soft cloth to clean smooth handles.
• Do not use a dry cloth to clean smooth doors.
Exterior &
Handles
(Stainless
Steel Models
Only)
• Soap and water
• Stainless steel
cleaners
• Never use CHLORIDE or cleaners with bleach to clean
stainless steel.
• Clean stainless steel front and handles with non-
abrasive soapy water and a dishcloth. Rinse with clean
water and a soft cloth.
• Use a non-abrasive stainless steel cleaner. These
cleaners can be purchased at most home improvement
or major department stores. Always follow
manufacturer’s instruction. Do not use household
cleaners containing ammonia or bleach. NOTE: Always
clean, wipe and dry with grain to prevent scratching.
• Wash the rest of the cabinet with warm water and
mild liquid detergent. Rinse well and wipe dry with a
clean soft cloth.
Replacing
Light Bulbs
• Unplug
refrigerator
• Wear gloves
• Remove light cover
• Replace old bulb
• Replace light cover
• Plug in the
refrigerator
• CAUTION: Wear gloves when replacing light bulbs to
avoid getting cut.
• Use same wattage when replacing bulb.
Loading ...
Loading ...
Loading ...