Greenworks 2400702 24V Axial Blower (100 MPH/330 CFM), 2Ah Battery and Charger (Gen 1)

User Manual - Page 8

For 2400702.

PDF File Manual, 16 pages, Read Online | Download pdf file

2400702 photo
Loading ...
Loading ...
Loading ...
Remove the blower tube when you move the
machine on a vehicle.
12.2 STORE THE MACHINE
Clean the machine before storage.
Make sure that the motor is not hot when you store
the machine.
Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
Replace the damaged parts.
Tighten the bolts.
Speak to a person of an approved service
center.
Store the machine in a dry area.
Make sure that children cannot come near the
machine.
13 TROUBLESHOOTING
PROBLEM POSSIBLE
CAUSE
SOLUTION
The motor does
not start when
you pull the trig-
ger.
The battery pack
is not installed
tightly.
Make sure that
you tighlty install
the battery pack
in the machine.
The battery pack
is out of power.
Charge the bat-
tery pack.
The machine
does not start.
The power switch
is defective.
Replace the de-
fective parts by
an approved
service center.
The motor is de-
fective.
The PCB board is
defective.
The air does not
flow through the
tube when you
start the ma-
chine.
The air inlet or
tube outlet has a
blockage.
Remove the
blockage.
14 TECHNICAL DATA
Voltage 24 V
Air volume 330 CFM
Air speed 100 MPH
Weight (without
battery pack)
1.5 kg (3.3 lbs.)
Battery model BAG series or LB24A020 / 29842
battery
Charger model CAG series or 29862 charger
The recommended ambient temperature range:
Item Temperature
Blower storage tempera-
ture range
-4°F (-20°C) - 158°F
(70°C)
Blower operation tempera-
ture range
-4°F (-20°C) - 104°F
(40°C)
Battery charging tempera-
ture range
39°F (4°C) - 104°F (40°C)
Charger operation temper-
ature range
39°F (4°C) - 113°F (45°C)
Battery storage tempera-
ture range
1 year: 32°F (0°C) - 73°F
(23°C)
3 months: 32°F (0°C) -
113°F (45°C)
1 months: 32°F (0°C) -
140°F (60°C)
Battery discharging tem-
perature range
6.8°F (-14°C) - 113°F
(45°C)
15 LIMITED WARRANTY
TOOL WARRANTY
YEAR/ANS/AÑOS
GARANTIE DE
L’OUTIL
HERRAMIENTA
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period of
four (4) years against defects in materials, parts or
workmanship. Greenworks, at its own discretion will
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been hired or
rented for industrial/commercial use, and that have
been maintained in accordance with the instructions in
the owners’ manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or
maintained in accordance with the owner's manual;
or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants,
blade sharpening;
5. Normal deterioration of the exterior finish due to use
or exposure.
8
English
EN
Loading ...
Loading ...
Loading ...