Loading ...
Loading ...
Loading ...
13
LED SILT19 lamps replacement:
Remove the cooker-hood upper cover by re-
moving the 4 xing screws (Fig. 15), nd the
damaged LED lamp and replace it with a new
one with the same characteristics.
Ret the upper cover.
LED SILT18 lamps replacement:
To replace the led lamp, rst remove the lo-
wer chromium plate cover by unscrewing its
metal ring, as shown in Fig. 11.
Hold the ber glass dome during the chro-
mium plated cover removing operations.
Remove the dome as per Fig.12.
Disconnect the electric connector of the led,
loosen the xing screws placed laterally to
the LED lamp, and remove it by pulling it
downwards. (Fig.15).
Replace the lamp with a new one with the
same characteristics.
Restore the electric connection and ret the
components previously removed.
SILT18 circular uorescent neon replace-
ment:
To replace the room circular uorescent neon
, rst remove the lower chromium plate co-
ver by unscrewing its metal ring, as shown
in Fig. 11.
Hold the ber glass dome during the chro-
mium plated cover removing operations .
Remove the dome as per Fig.12.
Remove the xing screws of the circular neon
support as per g. 16 and pull it downwards,
as per g. 17
Replace the damaged circular neon and ret
the components previously removed.
MAINTENANCE
An accurate maintenance guarantees good
functioning and long-lasting performance.
A special care is due to the grease lter.
SILT18 grease lters replacement
To remove the grease lters , rst remove the
lower chromium plated cover by unscrewing
the support metal ring using the suitable
spanner supplied with the appliance (Fig. 11).
Hold the ber glass dome during the chro-
mium plated cover removing operations.
Remove the dome as per Fig.12.
Unscrew the lter xing knob, rotate the sa-
fety lock and remove the lters as shown in
Fig. 13.
To insert the lter, please follow the reverse
procedure.
SILT19 grease lters replacement
Remove the lower cylindrical plate as shown
in Fig. 14, by pulling it downwards since it is
magnetically hold.
Remove the grease lters by acting on their
handle.
After 30 hours of operation of the cooker-
hood, the remote control will signal the lter
saturation by the simultaneous lighting of led
indicators; to reset, select the timer function
when the cooker-hood is o .
The metal grease lter can be washed by
hand or in the dishwasher.
The grease lter needs regular cleaning de-
pending on its use, once every two months
at least.
The charcoal lter needs to be replaced de-
pending on its use , once every six months
at least..
We recommend to use tepid water and a neu-
tral detergent to clean the appliance, while
abrasive products should be avoided .
The power cord replacement must be car-
ried out by specialized personnel only.
Loading ...
Loading ...
Loading ...