Loading ...
Loading ...
Loading ...
5. HEALTH AND SAFETY INFORMATION
- 9 -
5.2 CONNECTION TO THE POWER SUPPLY
CAUTION: Risk of electric shock. Do not open.
This appliance is supplied with a moulded 3 pin mains plug for your safety. The value of the fuse
fitted is marked on the pin face of the plug. Should the fuse need replacing, ensure the substitute
is of the correct rating, approved to BS1362 and ASTA or BS Kite marked.
ASTA
BSI
The fuse cover is removable with a small plain slot screwdriver. Ensure the fuse cover is replaced
before attempting to connect the plug to an electrical outlet. If the cover is missing, a replacement
must be obtained or the plug replaced with a suitable type.
If a replacement plug is to be fitted this must be carried out by a qualified electrician.
The damaged or incomplete plug, when cut from the cable shall be disabled to prevent connection
to a live electrical outlet.
This appliance is Class I† and is designed for connection to a power supply matching that detailed
on the rating label and compatible with the plug fitted.
If an extension lead is required, use an approved and compatible lead rated for this appliance.
Follow all the instruction supplied with the extension lead.
†Earthed : This product requires an earth connection to protect against electric shock from
accessible conductive parts in the event of a failure of the basic insulation.
Caution: Due to the high surface and exhaust temperatures, adults and children must
observe clearances to avoid burns or clothing ignition. Do not touch. Keep children,
clothing, and combustibles away.
- Never point the heater directly at persons nearby. Install the heater such that it is not directly
exposed to water spray, rain and / or water.
- Never use in areas normally for habitation and /or where children may be present. Not for
domestic use.
- Operate only on a stable, level surface.
- Do not use in a dusty atmosphere. Never restrict or duct inlet or outlet.
- Use only with electrical power supply specified on rating plate. The electrical connection
and earthing must comply with EN 60335-1 and EN 50165
- Use only a properly earthed socket and or extension cord.
- Do not move, handle, or service while the heater is hot or in use.
- Use only in accordance with national and local regulations, directives, and all other relevant
restrictions.
- WARNING: The space heaters must only be used on fire-resistant floors. Safety distance: 2
metres from walls or other objects. The space heater must not be used in rooms containing
explosive powders, gas fumes, flammable substances and materials. The burner must be
regularly cleaned if used in dusty environments. All service operations must be carried out by
duly qualified and authorised staff only.
Loading ...
Loading ...
Loading ...