Loading ...
Loading ...
Loading ...
- 13 -
8. ASSEMBLING THE SPACE HEATER
8.3 PREPARING FOR OPERATION
Check the heater thoroughly for damage. Do not use a
damaged heater. Be sure the heating area is adequately
ventilated, free of moisture and dust, far away from any
combustible material. Always put the gas cylinder behind the
heater in a stable position. Never put the gas cylinder in front
of the heater (Fig.3.).
Important: Locate heater at a safe distance from any
combustible materials.
Check the outlet pressure of the gas regulator and gas hose
according to the specification on the rating plate. Use only BS
3016 approved gas regulator and BS 3212 approved gas hose.
Gas hose should be in its natural form without excessive
bending and not twisted or kinked, ensure all connections are
gas tight.
Warning: When connecting to the gas cylinder, ensure the
area is flame free to prevent risk of explosion.
Screw fasten the gas hose with regulator to the cylinder valve.
Ensure the connection is tight.
Note: The gas connection to the heater has a left hand
thread.
Warning: Do not adjust regulator.
Screw fasten the gas hose to the heater ensuring that the
rubber hose is not twisted or kinked. Ensure the connection is
gas tight.
Loading ...
Loading ...
Loading ...