Goldair GPPAC400 Hot & Cold Portable Air Conditioner

Operating Instructions - Page 8

For GPPAC400.

PDF File Manual, 16 pages, Read Online | Download pdf file

GPPAC400 photo
Loading ...
Loading ...
Loading ...
Control Panel and Remote Control
This Portable Air Conditioner is designed to be operated in cooling mode, heating mode
or dehumidifying mode. When switching between these functions keep an interval of at
least 3 minutes between each ON/OFF.
Allow the refrigerant to settle by leaving the appliance to stand for two hours
after transport or after the unit has been on its side.
Ensure the unit is in the OFF setting before connecting it to the mains supply.
When the appliance is powered on for the first time, it will beep, and then the unit will be in
standby.
Power Button
Press the button to turn the unit ON and OFF.
Mode Button
Press the button to switch between Cooling Dehumidification Fan Heating modes.
Fan Speed Button
In cooling, heating and fan mode, press this key to select high, medium or low speed.
This function is not available in SLEEP mode and DEHUMIDIFYING mode.
Temperature Setting
To set the desired temperature, press UP or DOWN button. The range is 16-31
o
C.
This function is not available in fan or dehumidification mode.
Simultaneously press both buttons to switch between Celsius () and Fahrenheit ().
Timer Setting
The timer can be set to turn the unit ON or OFF from 1-24 hours.
To set the timer to turn the unit OFF, press the TIMER button then use the UP & DOWN buttons
to set the desired number of hours before the unit turns OFF.
To set the timer to turn the unit ON, press the TIMER button then use the UP & DOWN buttons
to set the desired number of hours before the unit turns ON.
Sleep Mode
In the Cooling or Heating Mode, Press the SLEEP button to turn on the sleep mode. The fan
speed is set to LOW and cannot be adjusted. The SLEEP mode can be cancelled by pressing
the SLEEP button again. In Cooling sleep mode, the temperature will rise 1°C after one hour
and rise 1°C after another one hour, and then stay the same. In Heating sleep mode, the
temperature will decrease 1°C after one hour and decrease 1°C after another one hour, and
then stay the same.
Note: You cannot not use sleep mode in the Dehumidifying or Fan modes.
Swing
Press the button to turn the oscillating louvre ON and OFF
Loading ...
Loading ...
Loading ...