Loading ...
Loading ...
Loading ...
Care and Maintenance
Clean the upper filter screen frame
• Clasp the wedging block of the EVA filter screen frame with hands. Force down from the
outside to remove the EVA filter screen frame. Unscrew four screws fixing the EVA filter
screen and the rear housing to remove the EVA filter screen (as shown in the below figure)
• Put the EVA filter screen into warm water with neutral detergent (about 40 ℃ / 104 ℉) and
dry it in the shade after rinsing clean.
Clean the lower filter screen frame
• Hold the handle of the CON filter screen frame and pull it outward gently to remove it.
• Put the CON filter screen into warm water with neutral detergent (about 40 ℃) and dry it in
the shade after rinsing clean.
NEVER USE UNIT WITHOUT THE AIR FILTER.
The exterior may be cleaned with a soft, dry cloth. If the device is extremely dirty wipe the
device with a slightly damp (not wet) cloth. Never spray the device with water.
DO NOT immerse the unit in water and never allow water to enter the motor housing.
DO NOT use harsh chemicals to clean the unit.
Do not attempt to dismantle the Air Conditioner. There are no user serviceable parts. For service
or repair, contact an authorised electrical service technician.
STORAGE
To store the unit, remove the plug from the socket. Remove the rubber plug from the drainage
hole at the bottom of unit and connect a drain hose to the lower fixing clip. All the water in the
water tank will drain out. Allow the Container and the Air Conditioner to dry completely. Clean
the air filter. Refit the rubber plug. Store the device in a dust-free location, preferably covered
with a sheet of plastic.
Loading ...
Loading ...
Loading ...