Loading ...
Loading ...
Loading ...
12 49-1000101 Rev. 2
Installing the Freezer
INSTALLATION INSTRUCTIONS
Freezer Location
Your freezer should be conveniently located for
day-to-day use in a dry, well-ventilated room.
Do not install the freezer where the temperature will go
below 0°F or above 110°F, because it will not maintain
proper temperatures.
Be sure to install your freezer on a floor strong enough
to support it when it is fully loaded.
Do not install the freezer in a location exposed to rain
water or direct sunlight.
Adjustable Legs
Legs at the front corners of the freezer should be set so
the freezer is firmly positioned on the floor, and the front
is raised just enough so the door closes easily when
opened about halfway.
Level Freezer
Use a carpenter’s level to level the freezer from back to
front. Adjust the plastic leveling feet in front 1/2 bubble
higher so the door closes easily when left open.
Unit Loading
NOTICE: To allow the door to close and seal properly,
DO NOT let food packages extend past the front of the
shelves.
Clearances
2QDOOPRGHOVDOORZ´PPRQWRSEDFNDQGVLGHVIRUSURSHUDLUFLUFXODWLRQ
Turn
right to
lower
Turn left
to raise
Door Handle
Shape of handle may vary on your model.
1. Align the handle with fasteners.
2. Push the handle over fasteners until it touches the
door.
3. Use the allen wrench to turn set screw clockwise to
fasten the handle to the door.
Fasteners
Set Screw
Allen Wrench
Loading ...
Loading ...
Loading ...