Loading ...
Loading ...
Loading ...
REMOVING AND iNSTALLiNG SLIDES
Rivet Style -
• To remove the slide from the unit, first remove the
drawer.
• After removing the drawers drill out the rivets, use a
5/32-in drill bit. The rivets will need to be replaced.
• To reinstall the slide, place the slide in the appropriate
position in the unit and pull toward the front of the unit.
Replace rivets to secure slide to the unit.
• For smooth operation, make sure the drawers are
matched with their original slides.
Drill out rivet
\
Snap-in Style -
• First remove the drawer. (See section B.)
To remove the slide:
• Push slide to the closed postion.
• Insert flat tip screw driver between slide and unit, behind
rear rectangular cutout.(See illustration.)
• Rotate screw driver ¼ turn to force slide away from unit.
• Push on front of slide pushing it towards back of the unit.
\
\
\
To attach the slide:
• Locate lances within respective cutout in carrier.
• Pull slide forward until slide locks back into place.
• Reinstall drawer following drawer installation procedure.
(See section C.)
Loading ...
Loading ...
Loading ...